Hi, 2010/2/27 Sergei Shtylyov <sshtyl...@ru.mvista.com>: > USB devices on the 2nd port are not detected and I get the following message: > > The request port(1) is not configured > > That's with default CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS value of 2. > 'req->index' > is 1-based, so the comparison in ehci_submit_root() can't be correct. > > Signed-off-by: Sergei Shtylyov <sshtyl...@mvista.com>
Applied to u-boot-usb Thanks! Remy > --- > drivers/usb/host/ehci-hcd.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > Index: u-boot/drivers/usb/host/ehci-hcd.c > =================================================================== > --- u-boot.orig/drivers/usb/host/ehci-hcd.c > +++ u-boot/drivers/usb/host/ehci-hcd.c > @@ -536,7 +536,7 @@ ehci_submit_root(struct usb_device *dev, > uint32_t reg; > uint32_t *status_reg; > > - if (le16_to_cpu(req->index) >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) { > + if (le16_to_cpu(req->index) > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) { > printf("The request port(%d) is not configured\n", > le16_to_cpu(req->index) - 1); > return -1; > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot