On Thu, 2018-07-19 at 13:29 +0300, Andy Shevchenko wrote: > On Thu, 2018-07-19 at 18:04 +0800, Bin Meng wrote: > > Hi Andy, > > > > On Thu, Jul 19, 2018 at 6:07 PM, Bin Meng <bmeng...@gmail.com> > > wrote: > > > This adds a reset driver for tangier processor. > > > > > > Signed-off-by: Bin Meng <bmeng...@gmail.com> > > > > > > --- > > > > > > Changes in v2: > > > - new patch to add a reset driver for tangier processor > > > > > > arch/x86/cpu/tangier/Makefile | 2 +- > > > arch/x86/cpu/tangier/sysreset.c | 48 > > > +++++++++++++++++++++++++++++++++++++++++ > > > 2 files changed, 49 insertions(+), 1 deletion(-) > > > create mode 100644 arch/x86/cpu/tangier/sysreset.c > > > > > > > Could you please help test this driver? This series is at > > u-boot-x86/reset branch. Thanks! > > Can you point me out to what exact steps I have to perform to test > this > functionality? > > Just boot to U-boot console, run 'reset' and see if everything works > as > before? Or something more?
So, I merged the mentioned branch on top of my testing setup for ACPI bits. After, I boot to U-boot console and type reset (done 2 times with different delay after boot: few seconds vs. few dozen of seconds). After I tried to boot my ACPI kernel. If it's enough, you may take mine Tested-by: Andy Shevchenko <andriy.shevche...@linux.intel.com> for u-boot-x86/reset branch. -- Andy Shevchenko <andriy.shevche...@linux.intel.com> Intel Finland Oy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot