This commit adjusts the autoboot.cmd file to use ${mmcbootdev} instead of
hardcoded value 0.
This is necessary to allow booting this board from the SD card.
Signed-off-by: Lukasz Majewski <lu...@denx.de>
---
board/samsung/common/bootscripts/autoboot.cmd | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/samsung/common/bootscripts/autoboot.cmd
b/board/samsung/common/bootscripts/autoboot.cmd
index 1faed8ba0c1a..11c724c4e095 100644
--- a/board/samsung/common/bootscripts/autoboot.cmd
+++ b/board/samsung/common/bootscripts/autoboot.cmd
@@ -74,15 +74,15 @@ setenv boot_img "
#### Routine: autoboot - choose proper boot path
setenv autoboot "
-if test -e mmc 0:${mmcbootpart} Image.itb; then
+if test -e mmc ${mmcbootdev}:${mmcbootpart} Image.itb; then
echo Found kernel image: Image.itb;
run setboot_fit;
run boot_img;
-elif test -e mmc 0:${mmcbootpart} zImage; then
+elif test -e mmc ${mmcbootdev}:${mmcbootpart} zImage; then
echo Found kernel image: zImage;
run setboot_zimg;
run boot_img;
-elif test -e mmc 0:${mmcbootpart} uImage; then
+elif test -e mmc ${mmcbootdev}:${mmcbootpart} uImage; then
echo Found kernel image: uImage;
run setboot_uimg;
run boot_img;
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
