I'm developing a custom board (designed by me) based on sh2a 7203 (Renesas). I have some troubles with my SST flash, while I'm sure my eth0 card works. For building my rootfs I use a script Im able to mount the nfsroot filesystem but I get this message: IP-Config: Complete: device=eth0, addr=192.168.1.3, mask=255.255.255.0, gw=192.168.1.254, host=uclinux, domain=, nis-domain=(none), bootserver=192.168.1.2, rootserver=192.168.1.2, rootpath= Looking up port of RPC 100003/3 on 192.168.1.2 Looking up port of RPC 100005/3 on 192.168.1.2 do_mount_root,270 - debug 1 /dev/root,0x0c1a58a0,0x00008000,0x0c24659c do_mount_root,273 - debug 2 do_mount_root,277 - debug 3 do_mount_root,279 - debug 4 VFS: Mounted root (nfs filesystem). Freeing unused kernel memory: 88k freed Warning: unable to open an initial console. Kernel panic - not syncing: No init found. Try passing init= option to kernel.
In rootpath I should read someting? Could the problem be my PC is little endian and I' exporting to a big endian CPU? Thanks in advance. -- Fabio Giovagnini Aurion s.r.l. P.I e C.F. 00885711200 Tel. +39.051.594.78.24 Cell. +39.335.83.50.919 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot