well, i don't want to use the second com port of the ns16550. Im using an external serial chip over EMIF. so -> no, i don't, wouldn't make any sense to me...
thx for the help On 18.03.2010, at 12:31, Michael Zaidman wrote: > On Thu, Mar 18, 2010 at 12:33 PM, Valentin Ecker > <valentin.ecker....@gmail.com> wrote: > ... >> While board initialization, serial_init() gets called, which calls >> the >> driver specific (hardware, etc...) init stuff. The default is that >> the >> default serial (in my case the SoC ns16550 ) will be initialized. So >> my extra serial port stays uninitialized because it's not default. > Did you add the CONFIG_SYS_NS16550_COM2 in your board > configuration file? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot