On Fri, Mar 19, 2010 at 10:49:27AM +0500, Nikolay Petukhov wrote: > 2010/3/19 Scott Wood <scottw...@freescale.com>: > > Is the second RNDOUT OK on small page NAND? > > > > I have NAND chip with 2K page size. > NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB > 3,3V 8-bit) > > Here, the positive results of operation of the at91_nand with small > pages http://patchwork.ozlabs.org/patch/4049/ > > >> + //struct atmel_nand_host *host = nand_chip->priv; > > > > Just remove the line. > > Done > > > > > -Scott > > > > This is a patch to use the hardware ECC controller of > the AT91SAM9260 for the AT91 nand. Taken from the kernel 2.6.33. > > Signed-off-by: Nikolay Petukhov <nikolay.petuk...@gmail.com>
Applied to u-boot-nand-flash next, but it took some manual editing of the e-mail to apply. Please don't let quoted printable be used when sending a patch (git seems to kind of support it, but I had to unwrap a couple lines manually, and if "git am" fails, the standard patch utility cannot be used), and make sure any comments which aren't to become part of the changelog go below a --- line. It's usually simpler to just send the new patch in a separate e-mail rather than combined with a discussion reply. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot