The serial port was being manually configured during SPL build, however in preparation to allow DM in SPL, this needs to change to be based on whether or not DM_SERIAL is enabled because, soon the assumption that SPL means no DM may not be accurate.
Signed-off-by: Adam Ford <aford...@gmail.com> diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index dcf76305db..c668284b3e 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -27,12 +27,10 @@ /* NS16550 Configuration */ #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#if defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_NS16550_SERIAL #if !defined(CONFIG_DM_SERIAL) +#define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #endif /* !CONFIG_DM_SERIAL */ -#endif /* CONFIG_SPL_BUILD */ #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ 115200} -- 2.17.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot