Add an option for building remoteproc drivers within SPL.
Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
---
common/spl/Kconfig | 6 ++++++
drivers/Makefile | 2 +-
drivers/remoteproc/Makefile | 2 +-
3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 67275eb39d..ba6be4dc40 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -642,6 +642,12 @@ config SPL_RAM_DEVICE
be already in memory when SPL takes over, e.g. loaded by the boot
ROM.
+config SPL_REMOTEPROC
+ bool "Support REMOTEPROCS"
+ help
+ Enable support for REMOTEPROCs in SPL. This permits to load
+ a remote processor firmware in SPL.
+
config SPL_RTC_SUPPORT
bool "Support RTC drivers"
help
diff --git a/drivers/Makefile b/drivers/Makefile
index c0124765db..23ea609b09 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/
obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
+obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
ifndef CONFIG_TPL_BUILD
ifdef CONFIG_SPL_BUILD
@@ -102,7 +103,6 @@ obj-y += input/
# SOC specific infrastructure drivers.
obj-y += smem/
obj-y += soc/
-obj-$(CONFIG_REMOTEPROC) += remoteproc/
obj-y += thermal/
obj-y += axi/
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 87ef9e61a7..77eb708523 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -4,7 +4,7 @@
# Texas Instruments Incorporated - http://www.ti.com/
#
-obj-$(CONFIG_REMOTEPROC) += rproc-uclass.o
+obj-$(CONFIG_$(SPL_)REMOTEPROC) += rproc-uclass.o
# Remote proc drivers - Please keep this list alphabetically sorted.
obj-$(CONFIG_K3_SYSTEM_CONTROLLER) += k3_system_controller.o
--
2.18.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
