On Mon, Jan 22, 2018 at 2:04 PM Diego Dorta <diegohdo...@gmail.com> wrote: > > Hi Peng, > > 2018-01-10 3:20 GMT-02:00 Peng Fan <peng....@nxp.com>: > > This patchset is to add i.MX8M and i.MX8MQ-EVK support > > > > V5: > > Drop wait_mask_set/clr_timeout and switch to use readl_poll_timeout in > > the patchset. > > > > V4: > > Regenerate patchset based on Tom's master tree. > > In this patchset, https://patchwork.ozlabs.org/patch/855027/ > > "arm: imx: Rework i.MX specific commands to be excluded from SPL" from > > Tom is included to avoid merge conflicts because the i.mx8m change > > also has some modification to bootaux and arch/arm/mach-imx/Makefile. > > Because CONFIG_GPT_TIMER change, I did a small modification to apply > > Tom's patch, no function change. > > > > Include ATF link in README. > > > > V3: > > This patchset based on https://patchwork.ozlabs.org/patch/855027/ > > "arm: imx: Rework i.MX specific commands to be excluded from SPL" from > > Tom to avoid this patchset fail apply after Tom's patch merged. > > > > Previously "power: pmic/regulator allow dm be omited by SPL" broke other > > boards, in V3 patchset, only touch pfuze100 related options. > > > > Sharing code about get mac from fuse between mx7/mx8m > > Sharing code about bootaux between mx6/7/mx8m > > Sharing code about cpu speed grade between mx7/mx8m > > Sharing code about get boot device between mx7/mx8m > > Sharding code about mmc env between mx7/mx8m > > > > Introduce wait_mask_set/clr_timeout to avoid deadloop in clock pll > > configuration > > > > Correct authorship of fix building warning on fec arm64, patch 27/31. > > > > Switch to use structure for DDR Controller. For DDR PHY registers, > > there are about more than 10 thousands registers, I could not convert > > them with detailed register name, and the script is generated from IC team, > > So I use regs[0xxxxx] arrays here fo easily converting between IC team > > released script and uboot ddr phy cod. > > > > Improve REAMME file to include where to download firmware and imx-mkimage > > and how to build > > > > Add review tags on the V2 patchset. > > > > Hope this patchset could catch up next release :) > > > > V2: > > > > patch 02/23: convert to structure, drop is_boot_from_usb and > > disconnect_from_usb > > patch 04/23: conver to use structure for the clock driver, removed the > > CCM_xxx macros. Add static for local functons. > > Add init_usdhc_clk, init_uart_clk and etc to not enable > > them all at default. > > patch 05/23: Add more commit msg for the sip part. > > patch 08/23: Merge the spl boot device with i.MX7 > > patch 12/23: Typo fix and return error fix from Heiko for the SoC related > > part > > patch 22/23: Use a weak function ddr_init. If patch 23/23 could not be > > accepted at current stage, to make others still be could be > > compiled. > > > > The patchset depends on > > https://patchwork.ozlabs.org/patch/841934/ > > https://patchwork.ozlabs.org/patch/841958/ > > to be tested on real hardware. > > > > V1: > > > > patch: "power: pmic.h: include dm/ofnode.h" and > > "power: pmic/regulator allow dm be omited by SPL" is previously reviewed > > in mailist to not merged. If no issue, you may pick it up. > > > > The board support is a large patch because of the ddr related code. > > If it is not good, please first review/pick-up other patches if they > > are ok. > > > > > > > > Peng Fan (29): > > imx: add i.MX8M into Kconfig > > imx: mx8m: add register definition header file > > imx: mx8m: add pin header file > > imx: mx8m: add clock driver > > imx: add sip function > > imx: boot_mode: add USB_BOOT entry > > imx: cpu: update cpu file to support i.MX8M > > imx: spl: implement spl_boot_device for i.MX8M > > imx: add i.MX8MQ SoC Revision and is_mx8m helper > > imx: add pad settings bit definition for i.MX8M > > imx: cpu: move speed/temp to common cpu > > imx: cpu: add cpu speed/grade for i.MX8M > > imx: refactor imx_get_mac_from_fuse > > imx: cleanup bootaux > > imx: bootaux: support i.MX8M > > imx: mx7: move get_boot_device to cpu.c > > imx: cpu: support get_boot_device for i.MX8M > > imx: mx7: move mmc env code to mmc_env.c > > imx: mx8m: add soc related settings and files > > imx: makefile: compile files for i.MX8M > > misc: ocotp: add i.MX8M support > > mmc: fsl_esdhc: support i.MX8M > > imx: lcdif: include i.MX8M > > gpio: mxc: add i.MX8M support > > net: fec: do not access reserved register for i.MX8M > > imx: imx8mq: add dtsi file > > power: pmic/regulator allow dm be omitted by SPL > > imx: mx8m: add ddr controller memory map > > imx: add i.MX8MQ EVK support > > > > Tom Rini (1): > > arm: imx: Rework i.MX specific commands to be excluded from SPL > > > > Ye Li (1): > > net: fec: fix build warnings for 64bits support > > > > I was able to run your patchset on my board. > > For the whole series: > > Tested-by: Diego Dorta <diego.do...@nxp.com> > > Thanks, > Diego > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot
Peng, Will you be releasing the script you are using to convert that code generated by the ddr training tool into this format? I would like to test your patchset on our new SOMs and that would be very useful. Thanks, Jon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot