On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote: > Hi Tom, > > please pull from u-boot-imx, thanks ! > > The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437: > > configs: am57xx: change default board name to beagle_x15 (2018-08-26 > 12:26:16 -0400) > > are available in the Git repository at: > > git://www.denx.de/git/u-boot-imx.git master > > for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b: > > imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31 > 12:08:43 +0200) > > ---------------------------------------------------------------- > Alex Kiernan (1): > Cleanup CONFIG_BOOTDELAY on cl-som-imx7 > > Anson Huang (3): > imx: mx7: psci: improve cpu hotplug flow > imx: mx7: add gpc initialization for low power mode > imx: mx7: add system suspend/resume support > > Denis Zalevskiy (6): > board: ge: Remove EEPROM bus param from read_vpd() > board: ge: Move VPD EEPROM configuration to the defconfig > bootcount: i2c: Add bus switching to the I2C bootcount driver > bootcount: Configure length limit for I2C bootcount > board: ge: Move VPD reading to the vpd_reader > board: ge: Store bootcount in EEPROM on PPD and Bx50v3 > > Martin Kaiser (1): > watchdog: mx25: use the imx_watchdog driver for mx25 > > Stefan Agner (2): > board: toradex: common: fail gracefully on missing NAND chip > colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support > > Stefano Babic (2): > Merge branch 'master' of git://git.denx.de/u-boot into master > imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig > > Sébastien Szymanski (1): > ARM: opos6ul: make the board boot again > > Ye Li (6): > imx: imx6sx-sdb: Enable DM QSPI driver > imx: imx6sx-sabreauto: convert to use DM QSPI driver > imx: imx7d-sdb: Add DM QSPI support > dts: imx6ul: Update alias to support DM > dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards > imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot > > arch/arm/dts/Makefile | 7 +- > arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi | 16 + > arch/arm/dts/imx6sx-sabreauto.dts | 40 ++ > arch/arm/dts/imx6sx-sdb-u-boot.dtsi | 16 + > arch/arm/dts/imx6sx.dtsi | 12 +- > arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi | 10 + > arch/arm/dts/imx6ul-14x14-evk.dts | 427 +++++++++++++++++++ > arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi | 10 + > arch/arm/dts/imx6ul-9x9-evk.dts | 471 > +++++++++++++++++++++ > arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi | 28 ++ > arch/arm/dts/imx6ul-opos6ul.dtsi | 2 - > arch/arm/dts/imx6ul-opos6uldev-u-boot.dts | 25 ++ > arch/arm/dts/imx6ul-opos6uldev.dts | 2 - > arch/arm/dts/imx6ul.dtsi | 13 +- > arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi | 10 + > arch/arm/dts/imx7d-sdb-qspi.dts | 44 ++ > arch/arm/dts/imx7d-sdb.dts | 6 +- > arch/arm/dts/imx7d.dtsi | 12 + > arch/arm/dts/imx7s.dtsi | 22 +- > arch/arm/include/asm/arch-mx25/imx-regs.h | 1 + > arch/arm/mach-imx/mx7/Makefile | 2 +- > arch/arm/mach-imx/mx7/psci-mx7.c | 472 > +++++++++++++++++++++- > arch/arm/mach-imx/mx7/psci-suspend.S | 67 +++ > arch/arm/mach-imx/mx7/soc.c | 103 +++++ > board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 24 -- > board/freescale/mx6sxsabresd/mx6sxsabresd.c | 25 -- > board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 208 ++-------- > board/freescale/mx7dsabresd/mx7dsabresd.c | 16 - > board/ge/bx50v3/Kconfig | 2 + > board/ge/bx50v3/bx50v3.c | 57 +-- > board/ge/common/Kconfig | 14 + > board/ge/common/vpd_reader.c | 57 ++- > board/ge/common/vpd_reader.h | 16 +- > board/ge/mx53ppd/Kconfig | 2 + > board/ge/mx53ppd/mx53ppd.c | 50 +-- > board/toradex/colibri_imx7/Kconfig | 42 +- > board/toradex/colibri_imx7/MAINTAINERS | 4 + > board/toradex/colibri_imx7/colibri_imx7.c | 41 +- > board/toradex/common/tdx-cfg-block.c | 7 +- > configs/ge_bx50v3_defconfig | 27 +- > configs/mx53ppd_defconfig | 29 +- > configs/mx6sxsabreauto_defconfig | 2 + > configs/mx6sxsabresd_defconfig | 7 + > configs/mx6ul_14x14_evk_defconfig | 17 +- > configs/mx6ul_9x9_evk_defconfig | 20 +- > configs/mx7dsabresd_qspi_defconfig | 84 ++++ > configs/opos6uldev_defconfig | 2 +- > drivers/bootcount/Kconfig | 21 +- > drivers/bootcount/bootcount_i2c.c | 78 +++- > drivers/watchdog/Makefile | 2 +- > include/configs/cl-som-imx7.h | 2 - > include/configs/colibri_imx7.h | 90 ++++- > include/configs/ge_bx50v3.h | 6 +- > include/configs/mx53ppd.h | 6 +- > include/configs/mx6sxsabresd.h | 4 + > include/configs/mx6ul_14x14_evk.h | 13 +- > include/configs/mx7dsabresd.h | 4 +- > 57 files changed, 2376 insertions(+), 421 deletions(-)
This is a lot. I know I should have tagged -rc3 this past Monday, but forgot (and so, yeah, I need to get back into my habit of calendar reminders), but still, the release is 10 days away. It looks like there's a lot of new stuff in here too, not just clean-ups. Are you sure this is all appropriate at this stage? Thanks! -- Tom
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot