On Tue, 2010-03-23 at 15:50 +0100, w.weg...@astro-kom.de wrote: > Dear list, > > I am trying to get ethernet to work on my custom MCF54455 board > and having some trouble. > > I have a DP83848J PHY connected in MII mode to each of the FEC0 > and FEC1 ports (seperate MDIO connection). Both PHYs are set to > address 0x0. *)
Are you sure this is what you want? From the data sheet: Strapping PHY Address 0 puts the part into Isolate Mode. When in the MII isolate mode, the DP83848J does not respond to packet data present at TXD[3:0], TX_EN inputs and presents a high impedance on the TX_CLK, RX_CLK, RX_DV, RX_ER, RXD[3:0], COL, and CRS outputs. When in Isolate mode, the DP83848J will continue to respond to all management transactions. John _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot