Part of the config is common between the VSC8584 and the VSC8574, so to
prepare for the upcoming support of VSC8574, use the phy_device.priv
pointer that will keep the function that holds code that is PHY-specific
and that should be called during config function.
Signed-off-by: Quentin Schulz <quentin.sch...@bootlin.com>
---
drivers/net/phy/mscc.c | 56 +++++++++++++++++++++++++++++-------------
1 file changed, 39 insertions(+), 17 deletions(-)
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index 0e54fe0eff..b9dfcadd85 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -249,6 +249,10 @@ vsc_phy_clk_slew {
VSC_PHY_CLK_SLEW_RATE_7,
};
+struct vsc85xx_priv {
+ int (*config_pre)(struct phy_device *phydev);
+};
+
static void vsc8584_csr_write(struct mii_dev *bus, int phy0, u16 addr, u32 val)
{
bus->write(bus, phy0, MDIO_DEVAD_NONE, MSCC_PHY_REG_TR_DATA_18,
@@ -444,11 +448,28 @@ static int vsc8584_patch_fw(struct mii_dev *bus, int phy,
const u8 *fw_patch,
return 0;
}
-static int vsc8584_config_pre_init(struct mii_dev *bus, int phy0)
+static int vsc8584_config_pre_init(struct phy_device *phydev)
{
- u16 reg, crc;
+ struct mii_dev *bus = phydev->bus;
+ u16 reg, crc, phy0, addr;
int ret;
+ if ((phydev->phy_id & MSCC_DEV_REV_MASK) != VSC8584_REVB) {
+ pr_warn("VSC8584 revA not officially supported, skipping
firmware patching. Use at your own risk.\n");
+ return 0;
+ }
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MSCC_EXT_PAGE_ACCESS,
+ MSCC_PHY_PAGE_EXT1);
+ addr = phy_read(phydev, MDIO_DEVAD_NONE, MSCC_PHY_EXT_PHY_CNTL_4);
+ addr >>= PHY_CNTL_4_ADDR_POS;
+
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, MSCC_PHY_ACTIPHY_CNTL);
+ if (reg & PHY_ADDR_REVERSED)
+ phy0 = phydev->addr + addr;
+ else
+ phy0 = phydev->addr - addr;
+
bus->write(bus, phy0, MDIO_DEVAD_NONE, MSCC_EXT_PAGE_ACCESS,
MSCC_PHY_PAGE_STD);
@@ -898,32 +919,22 @@ static int vsc8541_config(struct phy_device *phydev)
return genphy_config_aneg(phydev);
}
-static int vsc8584_config(struct phy_device *phydev)
+static int vsc8584_config_init(struct phy_device *phydev)
{
+ struct vsc85xx_priv *priv = phydev->priv;
int ret;
u16 addr;
u16 reg_val;
u16 val;
- u16 base_addr;
phy_write(phydev, MDIO_DEVAD_NONE, MSCC_EXT_PAGE_ACCESS,
MSCC_PHY_PAGE_EXT1);
addr = phy_read(phydev, MDIO_DEVAD_NONE, MSCC_PHY_EXT_PHY_CNTL_4);
addr >>= PHY_CNTL_4_ADDR_POS;
- val = phy_read(phydev, MDIO_DEVAD_NONE, MSCC_PHY_ACTIPHY_CNTL);
- if (val & PHY_ADDR_REVERSED)
- base_addr = phydev->addr + addr;
- else
- base_addr = phydev->addr - addr;
-
- if ((phydev->phy_id & MSCC_DEV_REV_MASK) != VSC8584_REVB) {
- pr_warn("VSC8584 revA not officially supported, skipping
firmware patching. Use at your own risk.\n");
- } else {
- ret = vsc8584_config_pre_init(phydev->bus, base_addr);
- if (ret)
- return ret;
- }
+ ret = priv->config_pre(phydev);
+ if (ret)
+ return ret;
phy_write(phydev, MDIO_DEVAD_NONE, MSCC_EXT_PAGE_ACCESS,
MSCC_PHY_PAGE_GPIO);
@@ -988,6 +999,17 @@ static int vsc8584_config(struct phy_device *phydev)
return genphy_config(phydev);
}
+static struct vsc85xx_priv vsc8584_priv = {
+ .config_pre = vsc8584_config_pre_init,
+};
+
+static int vsc8584_config(struct phy_device *phydev)
+{
+ phydev->priv = &vsc8584_priv;
+
+ return vsc8584_config_init(phydev);
+}
+
static struct phy_driver VSC8530_driver = {
.name = "Microsemi VSC8530",
.uid = PHY_ID_VSC8530,
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
