This should go into a -u-boot.dtsi file so that the
dragonboard410c.dts can be synced from the linux kernel without
change.
Peter
On Wed, Sep 19, 2018 at 7:31 PM Ramon Fried <ramon.fr...@gmail.com> wrote:
>
> Alias is required so req-seq will be filled.
>
> Signed-off-by: Ramon Fried <ramon.fr...@gmail.com>
> ---
>
> arch/arm/dts/dragonboard410c.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/dts/dragonboard410c.dts
> b/arch/arm/dts/dragonboard410c.dts
> index f4f7c350ec..75f28300b7 100644
> --- a/arch/arm/dts/dragonboard410c.dts
> +++ b/arch/arm/dts/dragonboard410c.dts
> @@ -18,6 +18,10 @@
> #address-cells = <0x2>;
> #size-cells = <0x2>;
>
> + aliases {
> + usb0 = "/soc/ehci@78d9000";
> + };
> +
> memory {
> device_type = "memory";
> reg = <0 0x80000000 0 0x3da00000>;
> --
> 2.18.0
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
