Hi, st 3. 10. 2018 v 7:58 odesílatel Michal Simek <michal.si...@xilinx.com> napsal:
> Xilinx is introducing Versal, an adaptive compute acceleration platform > (ACAP), built on 7nm FinFET process technology. Versal ACAPs combine > Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent > Engines with leading-edge memory and interfacing technologies to deliver > powerful heterogeneous acceleration for any application. The Versal AI > Core series has five devices, offering 128 to 400 AI Engines. The series > includes dual-core Arm Cortex™-A72 application processors, dual-core Arm > Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more > than 1,900 DSP engines optimized for high-precision floating point with > low latency. > > For more information please look at > https://www.xilinx.com/products/silicon-devices/acap/versal.html > > The patch series enables QEMU versal virt platform (xlnx-versal-virt) > where DTB is propagated from QEMU that's why CONFIG_OF_BOARD option is > used. > > Thanks, > Michal > > > Michal Simek (3): > arm64: versal: Add support for new Xilinx Versal ACAPs > net: gem: Do not setup any clock for Xilinx SoC Versal > arm64: versal: Add Xilinx Versal Virtual QEMU board > > Kconfig | 2 +- > MAINTAINERS | 6 ++ > arch/arm/Kconfig | 10 +++ > arch/arm/Makefile | 1 + > arch/arm/mach-versal/Kconfig | 44 +++++++++++++ > arch/arm/mach-versal/Makefile | 8 +++ > arch/arm/mach-versal/clk.c | 30 +++++++++ > arch/arm/mach-versal/cpu.c | 83 > ++++++++++++++++++++++++ > arch/arm/mach-versal/include/mach/gpio.h | 6 ++ > arch/arm/mach-versal/include/mach/hardware.h | 34 ++++++++++ > arch/arm/mach-versal/include/mach/sys_proto.h | 6 ++ > board/xilinx/versal/MAINTAINERS | 7 +++ > board/xilinx/versal/Makefile | 7 +++ > board/xilinx/versal/board.c | 81 > ++++++++++++++++++++++++ > configs/xilinx_versal_virt_defconfig | 68 ++++++++++++++++++++ > drivers/mmc/Kconfig | 2 +- > drivers/net/Kconfig | 2 +- > drivers/net/zynq_gem.c | 2 + > drivers/spi/Kconfig | 4 +- > env/Kconfig | 4 +- > include/configs/xilinx_versal.h | 91 > +++++++++++++++++++++++++++ > 21 files changed, 491 insertions(+), 7 deletions(-) > create mode 100644 arch/arm/mach-versal/Kconfig > create mode 100644 arch/arm/mach-versal/Makefile > create mode 100644 arch/arm/mach-versal/clk.c > create mode 100644 arch/arm/mach-versal/cpu.c > create mode 100644 arch/arm/mach-versal/include/mach/gpio.h > create mode 100644 arch/arm/mach-versal/include/mach/hardware.h > create mode 100644 arch/arm/mach-versal/include/mach/sys_proto.h > create mode 100644 board/xilinx/versal/MAINTAINERS > create mode 100644 board/xilinx/versal/Makefile > create mode 100644 board/xilinx/versal/board.c > create mode 100644 configs/xilinx_versal_virt_defconfig > create mode 100644 include/configs/xilinx_versal.h > > -- > 1.9.1 > > Any comment for this series? Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
