Dear Heiko Schocher, In message <4bb08be4....@denx.de> you wrote: > Booting a "Multi-File Image" including a linux kernel, ramdisk and > fdt, generated with > > mkimage -A ppc \ > -O linux \ > -T multi \ > -C gzip \ > -a 00000000 \ > -e 00000000 \ > -n "kernel-2.6+initrd+dtb" \ > -d "vmlinux.bin.gz:ramdisk_image.gz:board.dtb" \ > multi.bin > > actually fails, because ramdisk start and end addresses > didn;t get initialized. This patch fixes this issue. > > Tested on the KUP4K board. > > Signed-off-by: Heiko Schocher <h...@denx.de> > --- > common/cmd_bootm.c | 3 ++- > 1 files changed, 2 insertions(+), 1 deletions(-)
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de A witty saying proves nothing, but saying something pointless gets people's attention. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot