On Wed, Oct 10, 2018 at 11:21:45AM +0530, Jagan Teki wrote: > On Wed, Oct 10, 2018 at 11:14 AM Angelo Dureghello <ang...@sysam.it> wrote: > > > > Commit message? > Ok, will add it, v3 in short. > > Signed-off-by: Angelo Dureghello <ang...@sysam.it> > > --- > > Changes for v2: > > - new patch > > --- > > drivers/spi/Kconfig | 18 ++++++++++++------ > > 1 file changed, 12 insertions(+), 6 deletions(-) > > > > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig > > index 196767a3f6..6340453870 100644 > > --- a/drivers/spi/Kconfig > > +++ b/drivers/spi/Kconfig > > @@ -87,6 +87,12 @@ config CADENCE_QSPI > > used to access the SPI NOR flash on platforms embedding this > > Cadence IP core. > > > > +config CF_SPI > > + bool "ColdFire SPI driver" > > + help > > + Enable the ColdFire SPI driver. This driver can be used on > > + some m68k SoCs. > > + > > config DESIGNWARE_SPI > > bool "Designware SPI driver" > > help > > @@ -259,18 +265,18 @@ config ZYNQMP_GQSPI > > > > endif # if DM_SPI > > > > -config SOFT_SPI > > - bool "Soft SPI driver" > > - help > > - Enable Soft SPI driver. This driver is to use GPIO simulate > > - the SPI protocol. > > - > > config CF_SPI > > bool "ColdFire SPI driver" > > help > > Enable the ColdFire SPI driver. This driver can be used on > > some m68k SoCs. > > > > +config SOFT_SPI > > + bool "Soft SPI driver" > > + help > > + Enable Soft SPI driver. This driver is to use GPIO simulate > > + the SPI protocol. > > + > > Why this move?
Kconfig must keep alphabetical order. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot