On 10/19/2018 05:25 AM, Simon Glass wrote: > On 9 August 2018 at 13:04, Simon Goldschmidt > <simon.k.r.goldschm...@gmail.com> wrote: >> If _debug_uart_putc() is called before _debug_uart_init(), the >> ns16550 debug uart driver hangs in a tight loop waiting for the >> tx FIFO to get empty. >> >> As this can happen via a printf sneaking in before the port calls >> debug_uart_init(), let's rather ignore characters before the debug >> uart is initialized. >> >> This is done by reading the baudrate divisor and aborting if is zero. >> >> Tested on socfpga_cyclone5_socrates. >> >> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com> >> --- >> v2: >> - this patch is new in v2 of the series. It replaces the printf/debug >> change in reset_manager_gen5.c from v1 >> >> drivers/serial/ns16550.c | 18 ++++++++++++++++-- >> 1 file changed, 16 insertions(+), 2 deletions(-) > > We cannot use global_data before it is set up, so I think this is the > best solution. > > Acked-by: Simon Glass <s...@chromium.org>
So there's no GD available when using debug uart ? Hum. btw. Does the NS16550_read_baud_divisor() need to be called within the while loop ? -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot