Thomas Chou wrote: > This patch supports the Altera CycloneII Nios dev board using > the example FPGA design at http://nioswiki.com/Linux. > > Signed-off-by: Thomas Chou <tho...@wytron.com.tw> > --- > MAINTAINERS | 1 + > MAKEALL | 1 + > Makefile | 6 + > board/altera/nios2-generic/2c35_cf.h | 757 > ++++++++++++++++++++++++++++++++++ > include/configs/EP2C35.h | 372 +++++++++++++++++ > 5 files changed, 1137 insertions(+), 0 deletions(-) > create mode 100644 board/altera/nios2-generic/2c35_cf.h > create mode 100644 include/configs/EP2C35.h
I am strongly against this style of adding any specific nios board to U-BOOT. 1. I am not convinced that all information from 2c35_cf.h are important for U-BOOT. What connection has for example "#define KERNEL_REGION_BASE 0xc0000000"? or others. +#define PLL_COMPONENT_TYPE altera_avalon_pll +#define PLL_COMPONENT_NAME pll +#define PLL_BASE 0x1000020 +#define PLL_SPAN 32 It is the same situation as we solved for Xilinx boards. Create generic nios board and then generate only parameters which are necessary for U-BOOT itself. For example I am using only one microblaze generic board to cover all microblaze boards. Look at Microblaze or ppc405/440 solution. board/xilinx is good start for you. Wolfgang: Please reject these patches. Thanks, Michal -- Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/ Microblaze U-BOOT custodian _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot