On 11/3/18 8:19 PM, Vasily Khoruzhick wrote: > On Sat, Nov 3, 2018 at 1:18 PM Vasily Khoruzhick <anars...@gmail.com> wrote: >> >> Video is supposed to work, but you need ATF from Andre to enable LCD power: >> >> https://github.com/apritzel/arm-trusted-firmware/ > > You need "allwinner" branch from this repo.
I deliberately switched the standard branch away, since everything is merged in mainline ATF now (including PMIC support). I will post U-Boot patches to change the instructions soon, but just use the master branch from the official repo (and report back any issues!): https://github.com/ARM-Software/arm-trusted-firmware.git You might need the latest DT in U-Boot (patches are queued, AFAIK) to let ATF know about your PMIC requirements. Cheers, Andre >> On Sat, Nov 3, 2018 at 11:53 AM Dennis Gilmore <den...@ausil.us> wrote: >>> >>> I have tested the series on my pinebook on top of git commit >>> 99431c1c21685fe63d46b6eac995b78ce9adce0a >>> >>> I am not sure if video is expected to work or not, in my case it does >>> not work. >>> >>> U-Boot SPL 2018.11-rc3-00027-g77a46c3a3c (Nov 03 2018 - 13:42:47 -0500) >>> DRAM: 2048 MiB >>> Trying to boot from MMC1 >>> NOTICE: BL31: v1.6(release): >>> NOTICE: BL31: Built : 09:10:17, Sep 23 2018 >>> NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) >>> NOTICE: BL31: STUB PMIC setup code called >>> >>> >>> U-Boot 2018.11-rc3-00027-g77a46c3a3c (Nov 03 2018 - 13:42:47 -0500) >>> Allwinner Technology >>> >>> CPU: Allwinner A64 (SUN50I) >>> Model: Pinebook >>> DRAM: 2 GiB >>> MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 >>> Loading Environment from FAT... *** Warning - bad CRC, using default >>> environment >>> >>> Warning: HDMI PHY init timeout! >>> Warning: HDMI PHY init timeout! >>> In: serial >>> Out: serial >>> Err: serial >>> >>> u-boot however works fine and the system is able to boot and the >>> correct dtb is loaded. >>> >>> Tested-by: Dennis Gilmore <den...@ausil.us> >>> >>> El mar, 30-10-2018 a las 14:36 -0700, Vagrant Cascadian escribió: >>>> Tested series applied to u-boot 2018.11-rc3 on pinebook, both with >>>> reboot and cold boot. >>>> >>>> Thanks for all the work on it! >>>> >>>> Tested-by: Vagrant Cascadian <vagr...@debian.org> >>>> >>>> On 2018-10-28, Vasily Khoruzhick wrote: >>>>> This series adds support for the Pinebook, an allwinner A64 laptop >>>>> produced by Pine64. It also syncs sun50i-a64.dtsi with linux, >>>>> adds support for mmc delay calibration, R_I2C controller, >>>>> and addresses the issue with activating video bridge when any of >>>>> GPIOs is missing. >>>>> >>>>> v2: - sync sun50i-a64.dtsi with linux instead of adding missing >>>>> nodes >>>>> - take sun50i-a64-pinebook.dts from linux >>>>> - don't introduce new Kconfig for A64 MMC calibration >>>>> - improve code in video bridge uclass to check for presensce of >>>>> GPIO instead of ingoring EINVAL errors >>>>> v3: - enable calibration for H6 as well >>>>> - init ret variable in video_bridge_set_active() >>>>> - fix order of dts files Makefile >>>>> - split anx6345 binding into sun50i-a64-pinebook-u-boot.dts >>>>> - drop speaker_amp node from pinebook dts >>>>> - drop unnecessary options from defconfig >>>>> v4: - sync device tree files with linux-next >>>>> >>>>> Vasily Khoruzhick (5): >>>>> mmc: sunxi: add support for automatic delay calibration >>>>> dm: video: bridge: don't fail to activate bridge if reset or >>>>> sleep >>>>> GPIO is missing >>>>> sunxi: DT: A64: update device tree files for Allwinner A64 SoC >>>>> sun50i: A64: add support for R_I2C controller >>>>> sunxi: DT: add support for Pinebook >>>>> >>>>> arch/arm/dts/Makefile | 1 + >>>>> arch/arm/dts/sun50i-a64-amarula-relic.dts | 168 +++++++++- >>>>> arch/arm/dts/sun50i-a64-bananapi-m64.dts | 34 +- >>>>> arch/arm/dts/sun50i-a64-nanopi-a64.dts | 89 +++++- >>>>> arch/arm/dts/sun50i-a64-olinuxino.dts | 103 +++++- >>>>> arch/arm/dts/sun50i-a64-orangepi-win.dts | 179 ++++++++++- >>>>> arch/arm/dts/sun50i-a64-pine64.dts | 32 +- >>>>> arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 + >>>>> arch/arm/dts/sun50i-a64-pinebook.dts | 294 >>>>> +++++++++++++++++ >>>>> arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 32 +- >>>>> arch/arm/dts/sun50i-a64-sopine.dtsi | 15 + >>>>> arch/arm/dts/sun50i-a64.dtsi | 313 >>>>> +++++++++++++++++-- >>>>> arch/arm/include/asm/arch-sunxi/gpio.h | 1 + >>>>> arch/arm/include/asm/arch-sunxi/mmc.h | 6 +- >>>>> arch/arm/mach-sunxi/Kconfig | 1 + >>>>> board/sunxi/board.c | 6 + >>>>> configs/pinebook_defconfig | 22 ++ >>>>> drivers/mmc/sunxi_mmc.c | 21 +- >>>>> drivers/video/bridge/video-bridge-uclass.c | 16 +- >>>>> 19 files changed, 1296 insertions(+), 52 deletions(-) >>>>> create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi >>>>> create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts >>>>> create mode 100644 configs/pinebook_defconfig >>>>> >>>>> -- >>>>> 2.19.1 >>>> >>>> _______________________________________________ >>>> U-Boot mailing list >>>> U-Boot@lists.denx.de >>>> https://lists.denx.de/listinfo/u-boot >>> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot