Just compiled with the bootlin toolchain ' armv5-eabi--musl--stable-2018.02-2' from within buildroot and it looks like an image is produced within size. text data bss dec hex filename 17965 1180 4480 23625 5c49 u-boot-spl
It looks like the assertion calculates the assertion incorrectly, will comment on that patch. Ben > -----Original Message----- > From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On > Behalf Of Ben Whitten > Sent: 19 November 2018 10:30 > To: eugen.hris...@microchip.com; u-boot@lists.denx.de > Cc: nicolas.fe...@microchip.com > Subject: Re: [U-Boot] [PATCH 3/4] configs: > wb45n_defconfig: Remove SPL > > Hi, > > A shame as these boards only really need to start NAND and > boot uboot proper. Out of interest how much is it over in > the > builder? > > If SPL can't be shrunk any further then fair enough and; > Acked-by: Ben Whitten <ben.whit...@lairdtech.com> > > Thanks, > Ben > > > -----Original Message----- > > From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On > > Behalf Of eugen.hris...@microchip.com > > Sent: 19 November 2018 08:23 > > To: u-boot@lists.denx.de > > Cc: nicolas.fe...@microchip.com > > Subject: [U-Boot] [PATCH 3/4] configs: wb45n_defconfig: > > Remove SPL > > > > Due the size of SPL being too big, remove the SPL support. > > ---8<--- > > arm-linux-gnueabi-ld: SPL image too big > > --->8--- > > > > Signed-off-by: Eugen Hristev > > <eugen.hris...@microchip.com> > > --- > > configs/wb45n_defconfig | 6 ------ > > 1 file changed, 6 deletions(-) > > > > diff --git a/configs/wb45n_defconfig > > b/configs/wb45n_defconfig > > index 9d881e5..aef4e75 100644 > > --- a/configs/wb45n_defconfig > > +++ b/configs/wb45n_defconfig > > @@ -3,17 +3,11 @@ CONFIG_SYS_THUMB_BUILD=y > > CONFIG_ARCH_AT91=y > > CONFIG_SYS_TEXT_BASE=0x23f00000 > > CONFIG_TARGET_WB45N=y > > -CONFIG_SPL_GPIO_SUPPORT=y > > -CONFIG_SPL_LIBCOMMON_SUPPORT=y > > -CONFIG_SPL_LIBGENERIC_SUPPORT=y > > -CONFIG_SPL_SERIAL_SUPPORT=y > > -CONFIG_SPL=y > > CONFIG_NR_DRAM_BANKS=1 > > CONFIG_FIT=y > > > > > CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_NA > > NDFLASH" > > CONFIG_BOOTDELAY=3 > > CONFIG_BOARD_EARLY_INIT_F=y > > -CONFIG_SPL_NAND_SUPPORT=y > > CONFIG_HUSH_PARSER=y > > CONFIG_CMD_BOOTZ=y > > CONFIG_CMD_MEMTEST=y > > -- > > 2.7.4 > > > > > ______________________________________________ > > _ > > U-Boot mailing list > > U-Boot@lists.denx.de > > https://lists.denx.de/listinfo/u-boot > ______________________________________________ > _ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
