On 20/11/2018 10:09, Jean-Jacques Hiblot wrote:
Hi Sven,
On 18/11/2018 21:46, Tom Rini wrote:
On Sun, Nov 18, 2018 at 08:05:11PM +0100, Sven Schwermer wrote:
This configuration doesn't use USB in the SPL, so we need to disable
driver model for USB in the SPL.
Signed-off-by: Sven Schwermer <s...@svenschwermer.de>
How many other boards will need such a patch ?
In this case, "all" am335x boards should as only am43xx and later
offer
ROM loads SPL from a USB mass storage device (rather than showing
up as
a CDC ethernet device).
I actually tested this patch series on Travis CI and this was the
only “offender”. See
https://travis-ci.org/svenschwermer/u-boot/builds/456335517
<https://travis-ci.org/svenschwermer/u-boot/builds/456335517>
Are the other boards not checked in Travis? If so, I’d go through
them manually.
I mean functionally. But if you can confirm that it's not being enabled
on other platforms, that would be good, thanks!
FYI I posted a series a few weeks ago that adds a tool to automate
this kind of job. check out "[RFC PATCH v3 0/3] python tools to
inspect configs"
Command lines would be:
"tools/configs2csv.py --rebuild -" to build the database
and then
"tools/configs2csv.py CONFIG_SPL_DM_USB CONFIG_DM_USB > dm_usb_usage.csv"
more accurate (because some board don't use the same config for u-boot,
spl and tpl) and more readable (since we are interested only in the
boards that activate the options) would be:
"tools/configs2csv.py CONFIG_SPL_DM_USB CONFIG_DM_USB --u-boot --spl
--tpl --discard-empty > dm_usb_usage.csv"
JJ
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
