On Sat, Nov 10, 2018 at 10:13 AM Vasily Khoruzhick <anars...@gmail.com> wrote: > > Using new mode improves stability of eMMC and SD cards. Without > it SPL fails to load u-boot from SD on Pinebook. > > Signed-off-by: Vasily Khoruzhick <anars...@gmail.com> > Reviewed-by: Chen-Yu Tsai <w...@csie.org> > --- > arch/arm/mach-sunxi/Kconfig | 1 + > drivers/mmc/sunxi_mmc.c | 10 +++++++--- > 2 files changed, 8 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig > index 66fff6c6d3..3c54f5106d 100644 > --- a/arch/arm/mach-sunxi/Kconfig > +++ b/arch/arm/mach-sunxi/Kconfig > @@ -282,6 +282,7 @@ config MACH_SUN50I > select SUN6I_PRCM > select SUNXI_DE2 > select SUNXI_GEN_SUN6I > + select MMC_SUNXI_HAS_NEW_MODE > select SUPPORT_SPL > select SUNXI_DRAM_DW > select SUNXI_DRAM_DW_32BIT > diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c > index e50b2c3343..2b6f3c2234 100644 > --- a/drivers/mmc/sunxi_mmc.c > +++ b/drivers/mmc/sunxi_mmc.c > @@ -98,12 +98,16 @@ static int mmc_resource_init(int sdc_no) > static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz) > { > unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly; > - bool new_mode = false; > + bool new_mode = true; > bool calibrate = false; > u32 val = 0; > > - if (IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE) && (priv->mmc_no == 2)) > - new_mode = true; > + if (!IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE)) > + new_mode = false; > + > + /* A83 support new mode only on eMMC */
s/A83/A83T Tested-by: Jagan Teki <ja...@amarulasolutions.com> # Amarula A64-Relic Applied to u-boot-sunxi/master _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot