The current scenario for default UEFI booting, scan_dev_for_efi, has
several issues:
* load dtb dynamically even if its loacation (device) is not the same
as BOOTEFI_NAME binary's, (reported by Alex)
* invoke 'bootmgr' only if BOOTEFI_NAME binary does exit even though
'bootmgr' can and should work independently whether or not the binary
exist,
* in addition, invoke 'bootmgr' with dynamically-loaded dtb.
This behavior is not expected. (reported by Alex)
* always assume that a 'fdtfile' variable is defined,
("test -e ${devtype} ${devnum}:${distro_bootpart} "${prefix}${efi_fdtfile}"
always returns true even if fdtfile is NULL with prefix=="/".)
* redundantly check for 'fdt_addr_r' in boot_efi_binary
In this patch, all the issues above are sorted out.
Please note that the default behavior can be customized with:
fdtfile: a dtb file name
efi_dtb_prefixes: a list of paths for searching for a dtb file
(this feature does work even without this patch.)
Signed-off-by: AKASHI Takahiro <takahiro.aka...@linaro.org>
---
include/config_distro_bootcmd.h | 38 +++++++++++++++++----------------
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index 373fee78a999..256698309eb9 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -115,7 +115,7 @@
*/
#define BOOTENV_EFI_SET_FDTFILE_FALLBACK \
"if test -z \"${fdtfile}\" -a -n \"${soc}\"; then " \
- "setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; " \
+ "efi_fdtfile=${soc}-${board}${boardver}.dtb; " \
"fi; "
#else
#define BOOTENV_EFI_SET_FDTFILE_FALLBACK
@@ -124,26 +124,20 @@
#define BOOTENV_SHARED_EFI \
"boot_efi_binary=" \
- "if fdt addr ${fdt_addr_r}; then " \
- "bootefi bootmgr ${fdt_addr_r};" \
- "else " \
- "bootefi bootmgr ${fdtcontroladdr};" \
- "fi;" \
"load ${devtype} ${devnum}:${distro_bootpart} " \
"${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; " \
- "if fdt addr ${fdt_addr_r}; then " \
- "bootefi ${kernel_addr_r} ${fdt_addr_r};" \
- "else " \
- "bootefi ${kernel_addr_r} ${fdtcontroladdr};" \
- "fi\0" \
+ "bootefi ${kernel_addr_r} ${efi_fdt_addr};\0" \
\
"load_efi_dtb=" \
- "load ${devtype} ${devnum}:${distro_bootpart} " \
- "${fdt_addr_r} ${prefix}${efi_fdtfile}\0" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${fdt_addr_r} ${prefix}${efi_fdtfile}; " \
+ "if fdt addr ${fdt_addr_r}; then " \
+ "efi_fdt_addr=${fdt_addr_r}; " \
+ "fi;\0" \
\
"efi_dtb_prefixes=/ /dtb/ /dtb/current/\0" \
- "scan_dev_for_efi=" \
- "setenv efi_fdtfile ${fdtfile}; " \
+ "set_efi_fdt_addr=" \
+ "efi_fdtfile=${fdtfile}; " \
BOOTENV_EFI_SET_FDTFILE_FALLBACK \
"for prefix in ${efi_dtb_prefixes}; do " \
"if test -e ${devtype} " \
@@ -151,19 +145,26 @@
"${prefix}${efi_fdtfile}; then " \
"run load_efi_dtb; " \
"fi;" \
- "done;" \
+ "done;\0" \
+ \
+ "scan_dev_for_efi=" \
"if test -e ${devtype} ${devnum}:${distro_bootpart} " \
"efi/boot/"BOOTEFI_NAME"; then " \
"echo Found EFI removable media binary " \
"efi/boot/"BOOTEFI_NAME"; " \
+ "efi_fdt_addr=${fdtcontroladdr}; " \
+ "if test -n \"${fdtfile}\"; then " \
+ "run set_efi_fdt_addr; " \
+ "fi; " \
"run boot_efi_binary; " \
"echo EFI LOAD FAILED: continuing...; " \
- "fi; " \
- "setenv efi_fdtfile\0"
+ "fi;\0"
#define SCAN_DEV_FOR_EFI "run scan_dev_for_efi;"
+#define BOOT_EFI_BOOT_MANAGER "bootefi bootmgr;"
#else
#define BOOTENV_SHARED_EFI
#define SCAN_DEV_FOR_EFI
+#define BOOT_EFI_BOOT_MANAGER
#endif
#ifdef CONFIG_SATA
@@ -409,6 +410,7 @@
BOOT_TARGET_DEVICES(BOOTENV_DEV) \
\
"distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \
+ BOOT_EFI_BOOT_MANAGER \
"for target in ${boot_targets}; do " \
"run bootcmd_${target}; " \
"done\0"
--
2.19.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
