On 12/06/2018 09:30 PM, Tom Rini wrote: > On Mon, Dec 03, 2018 at 11:12:54PM +0100, Marek Vasut wrote: >> Enable watchdog and bootcounter support on the M53Menlo board. >> >> Signed-off-by: Marek Vasut <ma...@denx.de> >> Cc: Stefano Babic <sba...@denx.de> >> --- >> configs/m53menlo_defconfig | 7 +++++++ >> include/configs/m53menlo.h | 5 +++++ >> 2 files changed, 12 insertions(+) >> >> diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig >> index 795f8a3ebc..8e26431969 100644 >> --- a/configs/m53menlo_defconfig >> +++ b/configs/m53menlo_defconfig >> @@ -20,6 +20,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y >> CONFIG_VERSION_VARIABLE=y >> CONFIG_SPL_BOARD_INIT=y >> CONFIG_SPL_NAND_SUPPORT=y >> +CONFIG_SPL_WATCHDOG_SUPPORT=y >> CONFIG_HUSH_PARSER=y >> CONFIG_CMD_ASKENV=y >> CONFIG_CMD_GREPENV=y >> @@ -33,6 +34,7 @@ CONFIG_CMD_DHCP=y >> CONFIG_CMD_MII=y >> CONFIG_CMD_PING=y >> CONFIG_CMD_BMP=y >> +CONFIG_CMD_BOOTCOUNT=y >> CONFIG_CMD_DATE=y >> CONFIG_CMD_BTRFS=y >> CONFIG_CMD_EXT4=y >> @@ -44,6 +46,11 @@ CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand" >> >> CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:1m(u-boot),512k(env1),512k(env2),-(ubi)" >> CONFIG_CMD_UBI=y >> CONFIG_ENV_IS_IN_NAND=y >> +CONFIG_BOOTCOUNT_LIMIT=y >> +CONFIG_BOOTCOUNT_BOOTLIMIT=3 >> +CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y >> +CONFIG_SYS_BOOTCOUNT_ADDR=0x53FA401C >> +CONFIG_SYS_BOOTCOUNT_MAGIC=0x0B01C041 >> CONFIG_FSL_ESDHC=y >> CONFIG_NAND=y >> CONFIG_NAND_MXC=y >> diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h >> index 94214b135d..bef0c9b31d 100644 >> --- a/include/configs/m53menlo.h >> +++ b/include/configs/m53menlo.h >> @@ -158,6 +158,11 @@ >> /* IIM Fuses */ >> #define CONFIG_FSL_IIM >> >> +/* Watchdog */ >> +#define CONFIG_HW_WATCHDOG >> +#define CONFIG_IMX_WATCHDOG > > At least these two symbols are in Kconfig today, please use them (and > maybe some guard symbol is missing), thanks.
Fixed >> +#define CONFIG_WATCHDOG_TIMEOUT_MSECS 8000 > > This one isn't migrated yet, so I can't complain, only beg for a > migration :) Should be doable by running the script, there don't seem to be any intricacies involved with this one. -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot