On Apr 12, 2010, at 1:23 AM, Dave Liu wrote: > After power on, the SATA host controller of P1022 Rev1 is configured > in legacy mode instead of the expected enterprise mode. > > Software needs to clear bit[28] of HControl register to change to > enterprise mode after bringing the host offline. > > Signed-off-by: Dave Liu <dave...@freescale.com> > --- > * address Wolfgang's comments > > drivers/block/fsl_sata.c | 22 ++++++++++++++++++++++ > 1 files changed, 22 insertions(+), 0 deletions(-)
I think these versions look good ;) applied to 85xx - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot