On 18/12/2018 13:08, Jagan Teki wrote:
On Thu, Nov 29, 2018 at 3:30 PM Jean-Jacques Hiblot <jjhib...@ti.com> wrote:
UCLASS_USB_DEV_GENERIC was meant for USB devices connected to host
controllers, not gadget devices.
Adding a new UCLASS for gadget devices alone.
Also move the generic DM code for USB gadgets in a separate file for
clarity.
Signed-off-by: Jean-Jacques Hiblot <jjhib...@ti.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
board/sunxi/board.c | 2 +-
drivers/usb/dwc3/dwc3-generic.c | 2 +-
drivers/usb/gadget/ether.c | 2 +-
drivers/usb/gadget/udc/Makefile | 4 +++
drivers/usb/gadget/udc/udc-core.c | 41 --------------------------
drivers/usb/gadget/udc/udc-uclass.c | 58 +++++++++++++++++++++++++++++++++++++
drivers/usb/musb-new/omap2430.c | 2 +-
drivers/usb/musb-new/sunxi.c | 2 +-
include/dm/uclass-id.h | 1 +
9 files changed, 68 insertions(+), 46 deletions(-)
create mode 100644 drivers/usb/gadget/udc/udc-uclass.c
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 64ccbc7..9b36cc7 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -663,7 +663,7 @@ int g_dnl_board_usb_cable_connected(void)
struct phy phy;
int ret;
- ret = uclass_get_device(UCLASS_USB_DEV_GENERIC, 0, &dev);
+ ret = uclass_get_device(UCLASS_USB_GADGET_GENERIC, 0, &dev);
This is breaking sunxi boards which uses gadget mode.
U-Boot 2019.01-rc2 (Dec 18 2018 - 17:31:53 +0530) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: Banana Pi BPI-M2-Plus
DRAM: 1 GiB
Error binding driver 'sunxi-musb': -96
Some drivers failed to bind
Can you try with DM_USB_GADGET enabled ?
JJ
Error binding driver 'generic_simple_bus': -96
Some drivers failed to bind
initcall sequence 7dfd127c failed at call 4a00c3a3 (err=-96)
### ERROR ### Please RESET the board ###
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
