From: Tien Fong Chee <tien.fong.c...@intel.com>

Add support for loading FPGA bitstream to get DDR up running before
U-Boot is loaded into DDR. Boot device initialization, generic firmware
loader and SPL FAT support are required for this whole mechanism to work.

Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
---
 arch/arm/mach-socfpga/spl_a10.c |   46 ++++++++++++++++++++++++++++++++++++++-
 1 files changed, 45 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-socfpga/spl_a10.c b/arch/arm/mach-socfpga/spl_a10.c
index 3ea64f7..93f5f46 100644
--- a/arch/arm/mach-socfpga/spl_a10.c
+++ b/arch/arm/mach-socfpga/spl_a10.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *  Copyright (C) 2012-2018 Altera Corporation <www.altera.com>
  */
 
 #include <common.h>
@@ -23,9 +23,14 @@
 #include <fdtdec.h>
 #include <watchdog.h>
 #include <asm/arch/pinmux.h>
+#include <asm/arch/fpga_manager.h>
+#include <mmc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define FPGA_SOCFGA_A10_RBF_CORE_LOAD_DDR      (1 * 1024)
+#define FPGA_SOCFGA_A10_RBF_CORE_BUFFER_SIZE   (40 * 1024 * 1024)
+
 static const struct socfpga_system_manager *sysmgr_regs =
        (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 
@@ -73,6 +78,45 @@ void spl_board_init(void)
        WATCHDOG_RESET();
 
        arch_early_init_r();
+
+       /* If the full FPGA is already loaded, ie.from EPCQ, config fpga pins */
+       if (is_fpgamgr_user_mode()) {
+               config_pins(gd->fdt_blob, "shared");
+               config_pins(gd->fdt_blob, "fpga");
+       } else if (!is_fpgamgr_early_user_mode()) {
+               /* Program IOSSM(early IO release) or full FPGA */
+               fpga_fs_info fpga_fsinfo;
+               int len;
+               char buf[16 * 1024] __aligned(ARCH_DMA_MINALIGN);
+
+               fpga_fsinfo.filename = (char *)get_fpga_filename(
+                                               gd->fdt_blob,
+                                               &len,
+                                               FPGA_SOCFPGA_A10_RBF_PERIPH);
+
+               if (fpga_fsinfo.filename)
+                       socfpga_loadfs(&fpga_fsinfo, buf, sizeof(buf), 0);
+       }
+
+       /* If the IOSSM/full FPGA is already loaded, start DDR */
+       if (is_fpgamgr_early_user_mode() || is_fpgamgr_user_mode())
+               ddr_calibration_sequence();
+
+       if (!is_fpgamgr_user_mode()) {
+               fpga_fs_info fpga_fsinfo;
+               int len;
+
+               fpga_fsinfo.filename = (char *)get_fpga_filename(
+                                               gd->fdt_blob,
+                                               &len,
+                                               FPGA_SOCFPGA_A10_RBF_CORE);
+
+               if (fpga_fsinfo.filename)
+                       socfpga_loadfs(&fpga_fsinfo,
+                               (const void *)FPGA_SOCFGA_A10_RBF_CORE_LOAD_DDR,
+                               (size_t)FPGA_SOCFGA_A10_RBF_CORE_BUFFER_SIZE,
+                               0);
+       }
 }
 
 void board_init_f(ulong dummy)
-- 
1.7.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to