On Mon, 12 Apr 2010 09:33:14 +0200 Heiko Schocher <h...@denx.de> wrote:
> - This patch reworks all headerfiles for keymile boards (coge, supx4, > eter1, suen3). > Furthermore, a refactoring on the whole environment variables has been > acomplished. > > - Environment variables: > - grouped into logical blocks (#defines) based on the functionality/purpose > - short description for most of the variables > - as much as possible is moved into the common headerfile > - Keep the kernel command line clean from KM 'specialities'. > The boardId and hwKey is no longer needed as kernel arguments. > They are stored in the U-Boot environment and read out from userspace > later with the help of fw_printenv or equivalent tools. > - km8xx: default environment partitioning corrected > - Check the board id and the HW key stored in the environment with the values > stored in IVM. Board id and hardware key are patched into the environment > when building a keymile bootpackage. > - introduces the variable "initial_boot_bank" to the default > environment. The "actual_bank" is set to this value on first > startup. > It is normally set to 0. So the behaviour is as before. > If set to != 0, the first actual_bank is set to this > value as well. Thus a bootpackage can define a boot > bank other than 0. > > Signed-off-by: Andreas Huber <andreas.hu...@keymile.com> > Signed-off-by: Holger Brunck <holger.bru...@keymile.com> > Signed-off-by: Heiko Schocher <h...@denx.de> > --- since 3 of these 4 patches are in the mpc83xx domain, I went ahead and applied 1-4/4 and pushed to u-boot-mpc83xx.git. Thanks everyone, Kim _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot