From: Lars Povlsen <lars.povl...@microsemi.com>
This enables the use of the MSCC serial GPIO driver on the MSCC
VCoreIII 'ocelot' SOC, and add gpio-leds nodes to the pcb123 and
pcb120 DT.
Signed-off-by: Lars Povlsen <lars.povl...@microsemi.com>
---
arch/mips/dts/mscc,ocelot.dtsi | 23 ++++++++++
arch/mips/dts/ocelot_pcb120.dts | 76 +++++++++++++++++++++++++++++++++
arch/mips/dts/ocelot_pcb123.dts | 25 +++++++++++
3 files changed, 124 insertions(+)
diff --git a/arch/mips/dts/mscc,ocelot.dtsi b/arch/mips/dts/mscc,ocelot.dtsi
index 87b4736285..2592003103 100644
--- a/arch/mips/dts/mscc,ocelot.dtsi
+++ b/arch/mips/dts/mscc,ocelot.dtsi
@@ -37,6 +37,12 @@
clock-frequency = <500000000>;
};
+ sys_clk: sys-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ };
+
ahb_clk: ahb-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -118,6 +124,11 @@
#gpio-cells = <2>;
gpio-ranges = <&gpio 0 0 22>;
+ sgpio_pins: sgpio-pins {
+ pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
+ function = "sg0";
+ };
+
uart_pins: uart-pins {
pins = "GPIO_6", "GPIO_7";
function = "uart";
@@ -148,5 +159,17 @@
function = "si";
};
};
+
+ sgpio: gpio@10700f8 {
+ compatible = "mscc,ocelot-sgpio";
+ status = "disabled";
+ clocks = <&sys_clk>;
+ pinctrl-0 = <&sgpio_pins>;
+ pinctrl-names = "default";
+ reg = <0x10700f8 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&sgpio 0 0 64>;
+ };
};
};
diff --git a/arch/mips/dts/ocelot_pcb120.dts b/arch/mips/dts/ocelot_pcb120.dts
index 47d305a614..658719e684 100644
--- a/arch/mips/dts/ocelot_pcb120.dts
+++ b/arch/mips/dts/ocelot_pcb120.dts
@@ -9,4 +9,80 @@
/ {
model = "Ocelot PCB120 Reference Board";
compatible = "mscc,ocelot-pcb120", "mscc,ocelot";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ poe_green {
+ label = "pcb120:green:poe";
+ gpios = <&sgpio 44 1>; /* p12.1 */
+ default-state = "off";
+ };
+
+ poe_red {
+ label = "pcb120:red:poe";
+ gpios = <&sgpio 12 1>; /* p12.0 */
+ default-state = "off";
+ };
+
+ alarm_green {
+ label = "pcb120:green:alarm";
+ gpios = <&sgpio 45 1>; /* p13.1 */
+ default-state = "off";
+ };
+
+ alarm_red {
+ label = "pcb120:red:alarm";
+ gpios = <&sgpio 13 1>; /* p13.0 */
+ default-state = "off";
+ };
+
+ dc_a_green {
+ label = "pcb120:green:dc_a";
+ gpios = <&sgpio 46 1>; /* p14.1 */
+ default-state = "off";
+ };
+
+ dc_a_red {
+ label = "pcb120:red:dc_a";
+ gpios = <&sgpio 14 1>; /* p14.0 */
+ default-state = "off";
+ };
+
+ dc_b_green {
+ label = "pcb120:green:dc_b";
+ gpios = <&sgpio 47 1>; /* p15.1 */
+ default-state = "off";
+ };
+
+ dc_b_red {
+ label = "pcb120:red:dc_b";
+ gpios = <&sgpio 15 1>; /* p15.0 */
+ default-state = "off";
+ };
+
+ status_green {
+ label = "pcb120:green:status";
+ gpios = <&sgpio 48 1>; /* p16.1 */
+ default-state = "on";
+ };
+
+ status_red {
+ label = "pcb120:red:alarm";
+ gpios = <&sgpio 16 1>; /* p16.0 */
+ default-state = "off";
+ };
+
+ };
+
+};
+
+&sgpio {
+ status = "okay";
+ mscc,sgpio-ports = <0x000FFFFF>;
};
+
diff --git a/arch/mips/dts/ocelot_pcb123.dts b/arch/mips/dts/ocelot_pcb123.dts
index 17d8d326ce..c4cb7a1194 100644
--- a/arch/mips/dts/ocelot_pcb123.dts
+++ b/arch/mips/dts/ocelot_pcb123.dts
@@ -9,4 +9,29 @@
/ {
model = "Ocelot PCB123 Reference Board";
compatible = "mscc,ocelot-pcb123", "mscc,ocelot";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ status_green {
+ label = "pcb123:green:status";
+ gpios = <&sgpio 43 1>; /* p11.1 */
+ default-state = "on";
+ };
+
+ status_red {
+ label = "pcb123:red:status";
+ gpios = <&sgpio 11 1>; /* p11.0 */
+ default-state = "off";
+ };
+ };
+};
+
+&sgpio {
+ status = "okay";
+ mscc,sgpio-ports = <0x00FFFFFF>;
};
--
2.19.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
