On 15/01/19 4:37 PM, Abel Vesa wrote: > Some boards might need USB_STORAGE enabled in u-boot proper but not in SPL. > Make a separate config for SPL and keep the same depends on conditions but > for SPL. > > Signed-off-by: Abel Vesa <abel.v...@nxp.com> > --- > common/Makefile | 2 +- > configs/apalis_imx6_defconfig | 1 + > configs/colibri_imx6_defconfig | 1 + > configs/mx6sabresd_defconfig | 1 + > drivers/usb/Kconfig | 8 ++++++++ > 5 files changed, 12 insertions(+), 1 deletion(-)
New config SPL_USB_STORAGE should be enabled for all boards that currently have CONFIG_SPL_USB_HOST_SUPPORT=y and CONFIG_USB_STORAGE=y right? I see that atleast configs/am43xx_evm_usbhost_boot_defconfig is not in the above list. Regards Vignesh > > diff --git a/common/Makefile b/common/Makefile > index 0de60b3..34931f3 100644 > --- a/common/Makefile > +++ b/common/Makefile > @@ -77,7 +77,7 @@ obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o > > ifdef CONFIG_SPL_USB_HOST_SUPPORT > obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o > -obj-$(CONFIG_USB_STORAGE) += usb_storage.o > +obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o > else > obj-$(CONFIG_USB_MUSB_HOST) += usb.o > endif > diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig > index e02d9bc..c4916ad 100644 > --- a/configs/apalis_imx6_defconfig > +++ b/configs/apalis_imx6_defconfig > @@ -25,6 +25,7 @@ CONFIG_SPL_I2C_SUPPORT=y > CONFIG_SPL_USB_HOST_SUPPORT=y > CONFIG_SPL_USB_GADGET=y > CONFIG_SPL_USB_SDP_SUPPORT=y > +CONFIG_SPL_USB_STORAGE=y > CONFIG_HUSH_PARSER=y > CONFIG_SYS_PROMPT="Apalis iMX6 # " > CONFIG_CMD_BOOTZ=y > diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig > index 68f0746..441a4e7 100644 > --- a/configs/colibri_imx6_defconfig > +++ b/configs/colibri_imx6_defconfig > @@ -25,6 +25,7 @@ CONFIG_SPL_I2C_SUPPORT=y > CONFIG_SPL_USB_HOST_SUPPORT=y > CONFIG_SPL_USB_GADGET=y > CONFIG_SPL_USB_SDP_SUPPORT=y > +CONFIG_SPL_USB_STORAGE=y > CONFIG_HUSH_PARSER=y > CONFIG_SYS_PROMPT="Colibri iMX6 # " > CONFIG_CMD_BOOTZ=y > diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig > index 1857c18..3532fce 100644 > --- a/configs/mx6sabresd_defconfig > +++ b/configs/mx6sabresd_defconfig > @@ -21,6 +21,7 @@ CONFIG_SPL_OS_BOOT=y > CONFIG_SPL_USB_HOST_SUPPORT=y > CONFIG_SPL_USB_GADGET=y > CONFIG_SPL_USB_SDP_SUPPORT=y > +CONFIG_SPL_USB_STORAGE=y > CONFIG_SPL_WATCHDOG_SUPPORT=y > CONFIG_HUSH_PARSER=y > CONFIG_CMD_BOOTZ=y > diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig > index 3b53bf2..4185e16 100644 > --- a/drivers/usb/Kconfig > +++ b/drivers/usb/Kconfig > @@ -89,6 +89,14 @@ config USB_STORAGE > Say Y here if you want to connect USB mass storage devices to your > board's USB port. > > +config SPL_USB_STORAGE > + bool "SPL USB Mass Storage support" > + depends on !(SPL_BLK && !SPL_DM_USB) > + ---help--- > + Say Y here if you want to connect USB mass storage devices to your > + board's USB port in SPL. > + > + > config USB_KEYBOARD > bool "USB Keyboard support" > select SYS_STDIO_DEREGISTER > -- Regards Vignesh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot