Signed-off-by: Lukasz Majewski <lu...@denx.de> --- Changes in v2: None
include/configs/bk4r1.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h index bbd3e4e636..7bd3411ff2 100644 --- a/include/configs/bk4r1.h +++ b/include/configs/bk4r1.h @@ -189,6 +189,37 @@ "ubi part system; " \ "ubi write ${sys_addr} rootfs${active_workset} ${filesize}; " \ "ubi detach; fi\0" \ + "setup_dtbkernel=nand erase.part dtbkernel; " \ + "ubi part dtbkernel; " \ + "ubi create dtbkernel1 972000 s; " \ + "ubi create dtbkernel2 972000 s; " \ + "ubi detach\0" \ + "setup_system=nand erase.part system; " \ + "ubi part system; " \ + "ubi create rootfs1 15E15000 d; " \ + "ubi create rootfs2 15E15000 d; " \ + "ubi create userdata; " \ + "ubi detach\0" \ + "prepare_install_bk4r1_envs=" \ + "echo 'Preparing envs for SD card recovery!';" \ + "setenv ipaddr 192.168.0.99;" \ + "setenv serverip 192.168.0.50;" \ + "\0" \ + "install_bk4r1rs="\ + "led 0 on; " \ + "nand erase.chip; mtdparts default; "\ + "led 1 on; "\ + "run setup_dtbkernel; " \ + "run setup_system; " \ + "led 2 on;" \ + "run update_bootloader_from_sd; "\ + "run update_dtbkernel_from_sd; "\ + "run update_rootfs_from_sd; "\ + "setenv bootcmd 'run bootcmd_nand'; "\ + "saveenv; " \ + "led 3 on; " \ + "echo Finished - Please Power off, REMOVE SDCARD and set boot" \ + "source to NAND\0" \ "active_workset=1\0" /* Miscellaneous configurable options */ -- 2.11.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot