Hi Fabio
> Le 31 janv. 2019 à 02:16, Fabio Estevam <feste...@gmail.com> a écrit : > > Hi Bryan and Joris, > > On Wed, Jan 23, 2019 at 7:53 AM Bryan O'Donoghue > <bryan.odonog...@linaro.org> wrote: > >> Hi Joris, >> >> I've been told that this board exhibits this same problem even without >> the DM conversion. >> >> "PMIC: PFUZE3000 DEV_ID=0x0 REV_ID=0xfffffffb >> read error from device: 9df65458 register: 0x69! >> write error to device: 9df65458 register: 0x23! >> write error to device: 9df65458 register: 0x31!" > > I cannot reproduce the error here on U-Boot master: > > U-Boot SPL 2019.01-00410-g748ad078ee (Jan 30 2019 - 23:02:31 -0200) > Trying to boot from MMC1 > > > U-Boot 2019.01-00410-g748ad078ee (Jan 30 2019 - 23:02:31 -0200) > > CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) > CPU: Commercial temperature grade (0C to 95C) at 47C > Reset cause: POR > Board: i.MX7D PICOSOM > I2C: ready > DRAM: 512 MiB > PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 > MMC: FSL_SDHC: 0 > Loading Environment from MMC... OK > Video: 800x480x24 > In: serial > Out: serial > Err: serial > Net: FEC0 > Hit any key to stop autoboot: 0 > > Are you sure the PMIC problem happens prior to the DM conversion? The PMIC problem occurs after the dm conversion _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot