From: Tien Fong Chee <tien.fong.c...@intel.com>
Add support for loading FPGA bitstream to get DDR up running before
U-Boot is loaded into DDR. Boot device initialization, generic firmware
loader and SPL FAT support are required for this whole mechanism to work.
Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
---
changes for v7
- Removed casting for get_fpga_filename
- Removed hard coding DDR address for loading core bistream, using loadable
property from FIT.
- Added checking for config_pins, return if error.
---
arch/arm/mach-socfpga/spl_a10.c | 46 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-socfpga/spl_a10.c b/arch/arm/mach-socfpga/spl_a10.c
index c97eacb..dae3b8c 100644
--- a/arch/arm/mach-socfpga/spl_a10.c
+++ b/arch/arm/mach-socfpga/spl_a10.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2012-2019 Altera Corporation <www.altera.com>
*/
#include <common.h>
@@ -23,6 +23,8 @@
#include <fdtdec.h>
#include <watchdog.h>
#include <asm/arch/pinmux.h>
+#include <asm/arch/fpga_manager.h>
+#include <mmc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -68,11 +70,53 @@ u32 spl_boot_mode(const u32 boot_device)
void spl_board_init(void)
{
+ char buf[16 * 1024] __aligned(ARCH_DMA_MINALIGN);
+
/* enable console uart printing */
preloader_console_init();
WATCHDOG_RESET();
arch_early_init_r();
+
+ /* If the full FPGA is already loaded, ie.from EPCQ, config fpga pins */
+ if (is_fpgamgr_user_mode()) {
+ int ret = config_pins(gd->fdt_blob, "shared");
+ if (ret)
+ return;
+
+ ret = config_pins(gd->fdt_blob, "fpga");
+ if (ret)
+ return;
+ } else if (!is_fpgamgr_early_user_mode()) {
+ /* Program IOSSM(early IO release) or full FPGA */
+ fpga_fs_info fpga_fsinfo;
+ int len;
+
+ fpga_fsinfo.filename = get_fpga_filename(
+ gd->fdt_blob,
+ &len,
+ FPGA_SOCFPGA_A10_RBF_PERIPH);
+
+ if (fpga_fsinfo.filename)
+ socfpga_loadfs(&fpga_fsinfo, buf, sizeof(buf), 0);
+ }
+
+ /* If the IOSSM/full FPGA is already loaded, start DDR */
+ if (is_fpgamgr_early_user_mode() || is_fpgamgr_user_mode())
+ ddr_calibration_sequence();
+
+ if (!is_fpgamgr_user_mode()) {
+ fpga_fs_info fpga_fsinfo;
+ int len;
+
+ fpga_fsinfo.filename = get_fpga_filename(
+ gd->fdt_blob,
+ &len,
+ FPGA_SOCFPGA_A10_RBF_CORE);
+
+ if (fpga_fsinfo.filename)
+ socfpga_loadfs(&fpga_fsinfo, buf, sizeof(buf), 0);
+ }
}
void board_init_f(ulong dummy)
--
2.2.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
