Thank you Jagan, most kind. I will report back. -----Original Message----- From: Jagan Teki <ja...@amarulasolutions.com> Sent: 31 January 2019 15:44 To: g...@novadsp.com Cc: U-Boot-Denx <u-boot@lists.denx.de> Subject: Re: [U-Boot] Help: CONFIG_ENV_IS_IN_SPI_FLASH on AllWinner H5?
On Thu, Jan 31, 2019 at 8:57 PM <g...@novadsp.com> wrote: > > Greetings. Please let me know if there is a better place to ask this > question. > > Any clues here? I've got an AllWinner H5 with Winbond SPI flash > attached on SPI0. The flash is programmed using the sunxi FEL tools and boots > perfectly. > Now I'd like to save the environment there too. > > Loading Environment from SPI Flash... > Invalid bus 0 (err=-19) > *** Warning - spi_flash_probe_bus_cs() failed, using default > environment > > TAIA > > Jerry. > ------------------------------------------------------- > CONFIG_ARM=y > CONFIG_ARCH_SUNXI=y > CONFIG_SPL=y > CONFIG_MACH_SUN50I_H5=y > CONFIG_DRAM_CLK=504 > CONFIG_DRAM_ZQ=3881977 > CONFIG_DRAM_ODT_EN=y > CONFIG_MACPWR="PD6" > CONFIG_MMC_SUNXI_SLOT_EXTRA=2 > CONFIG_SPL_SPI_SUNXI=y > CONFIG_SPL_SPI_FLASH_SUPPORT=y > CONFIG_CMD_SF=y > CONFIG_CMD_SF_TEST=y > CONFIG_DEFAULT_DEVICE_TREE="anemos-sc5" > CONFIG_ENV_IS_IN_SPI_FLASH=y > CONFIG_NET_RANDOM_ETHADDR=y > CONFIG_MTD=y > CONFIG_MTD_DEVICE=y > CONFIG_DM_SPI_FLASH=y > CONFIG_SUN8I_EMAC=y > CONFIG_SPI=y > CONFIG_DM_SPI=y > CONFIG_SUN4I_SPI=y Existing controller cann't handle SPI on H5, try below branch [1] it has sun6i spi driver and sample patch for sopine. [1] https://github.com/amarula/u-boot-amarula/tree/spi _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot