On 1/31/19 4:59 PM, Tom Rini wrote:
On Thu, Jan 31, 2019 at 04:48:10PM +0100, Hannes Schmelzer wrote:
On 1/31/19 3:57 PM, Tom Rini wrote:
On Thu, Jan 31, 2019 at 08:03:19AM +0100, Hannes Schmelzer wrote:
commit fdce9d35dc36 ("arm: dts: am33xx: Sync dts with Linux 4.20.0")
did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was
introduced with
commit 19aa4ac09db9 ("dts: am33xx: add u-boot, dm-spl to ocp bus")
Due to this the brppt1_spi board is broken because it cannot
bind/probe the spi-interface during SPL stage.
This commit adds this flag again.
This flag is needed for having access to the devices below this bus,
most important is uart and boot-device (spi, mmc, ...) in SPL stage.
Signed-off-by: Hannes Schmelzer <hannes.schmel...@br-automation.com>
---
arch/arm/dts/am33xx.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/dts/am33xx.dtsi b/arch/arm/dts/am33xx.dtsi
index d3dd6a1..0a6b177 100644
--- a/arch/arm/dts/am33xx.dtsi
+++ b/arch/arm/dts/am33xx.dtsi
@@ -160,6 +160,7 @@
* the whole bus hierarchy.
*/
ocp {
+ u-boot,dm-spl;
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
We need to put this into one of the -u-boot.dtsi files and then #include
it from the others, so that we don't keep dropping this flag. Thanks!
Hi Tom,
i'm not sure if we can do that this way because the "ocp" bus has no valid
label like other elements.
So we have at least to adjust the am33xx.dtsi file like this:
ocp : ocp {
compatible = "simple-bus";
.....
}
what do you suggest ?
Er, with the example of arch/arm/dts/am335x-pdu001-u-boot.dtsi should't
we be able to just do that, globally? Or is that part _not_ working and
relied on the now removed hunk?
Hi Tom,
I'll verify this tomorrow. But the pdu001 looks good to me.
This would be a solution for my boards too if it does the job.
Keep you up to date.
cheers,
Hannes
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
