On 21.01.2019 15:22, Lukasz Majewski wrote: > On Mon, 21 Jan 2019 09:33:23 +0100 > Lukasz Majewski <lu...@denx.de> wrote: > >> Hi Stefan, >> >> > This patch series converts PCM052 and BK4 to use Driver Model and >> > Device Tree. >> > >> > Some notable changes: >> > - The way how MAC address is read from fuses can now be adjusted >> > - DTS improvement/sync with kernel (also extract u-boot specific >> > properties) >> > - Using generic code instead of one from board >> > >> > The output of u-boot boot: >> > U-Boot 2019.01-rc3-00076-gc149229be0 (Jan 14 2019 - 08:38:48 +0100) >> > >> > CPU: Freescale Vybrid VF610 at 396 MHz >> > Reset cause: POWER ON RESET >> > Model: Liebherr (LVF) BK4 Vybrid Board >> > Board: BK4r1 (L333) >> > DRAM: 512 MiB >> > NAND: 1024 MiB >> > MMC: FSL_SDHC: 0 >> > Loading Environment from NAND... OK >> > In: serial@40028000 >> > Out: serial@40028000 >> > Err: serial@40028000 >> > Net: eth0: fec@400d0000, eth1: fec@400d1000 >> > Enter passphrase to stop autoboot, booting in 3 seconds >> > >> > Buildman CI: >> > ./tools/buildman/buildman.py --branch=HEAD~4 vf610 mx6 vybrid >> > --detail --verbose --show_errors --force-build --count=21 >> > --output-dir=../BUILD/ >> > >> > Travis-CI: >> > https://travis-ci.org/lmajewski/u-boot-dfu/jobs/481963146 >> >> I've bisected this error, and it turned out that the following patch >> is the culprit (on top of which I've rebased my work): >> >> "fs: fat: dynamically allocate memory for temporary buffer" >> >> Without this patch applied: >> https://travis-ci.org/lmajewski/u-boot-dfu/builds/482301236 >> >> With: >> https://travis-ci.org/lmajewski/u-boot-dfu/builds/482297604 >> >> Test: test/py qemu_arm >> >> Error is in: "test_efi_selftest" >> >> Executing 'block device' >> /home/travis/build/lmajewski/u-boot-dfu/lib/efi_selftest/efi_selftest_block_device.c(386): >> TODO: Wrong volume label 'xxa1', expected 'U-BOOT TEST' >> /home/travis/build/lmajewski/u-boot-dfu/lib/efi_selftest/efi_selftest_block_device.c(413): >> ERROR: Unexpected file content >> /home/travis/build/lmajewski/u-boot-dfu/lib/efi_selftest/efi_selftest.c(110): >> ERROR: Executing 'block device' failed >> >> > > And the full travis-ci build without the above patch (all "green"): > > https://travis-ci.org/lmajewski/u-boot-dfu/builds/482308817 >
I skimmed through the rest of the patchset but did not do a full review. But I am ok with the rest of the patches. I also tested the patchset on our Colibri VF50, and U-Boot seems to work fine! Thanks for your work! -- Stefan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot