On 1/31/19 6:38 PM, Oleksandr Tyshchenko wrote:
> From: Oleksandr Tyshchenko <oleksandr_tyshche...@epam.com>
>
> Also take care of the fact that Lager and Stout boards use
> different serial interface for console.
This describes something else than $subject , please split the patchset
such that one patch does one thing and describes that one thing in the
commit message.
> Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshche...@epam.com>
> ---
> arch/arm/mach-rmobile/debug.h | 91
> +++++++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-rmobile/psci.c | 23 +++++++++++
> 2 files changed, 114 insertions(+)
> create mode 100644 arch/arm/mach-rmobile/debug.h
>
> diff --git a/arch/arm/mach-rmobile/debug.h b/arch/arm/mach-rmobile/debug.h
> new file mode 100644
> index 0000000..5d4ec77
> --- /dev/null
> +++ b/arch/arm/mach-rmobile/debug.h
> @@ -0,0 +1,91 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Contains functions used for PSCI debug.
> + *
> + * Copyright (C) 2018 EPAM Systems Inc.
> + *
> + * Based on arch/arm/mach-uniphier/debug.h
> + */
> +
> +#ifndef __DEBUG_H__
> +#define __DEBUG_H__
> +
> +#include <asm/io.h>
> +
> +/* SCIFA definitions */
> +#define SCIFA_BASE 0xe6c40000
Should come from DT
> +#define SCIFA_SCASSR 0x14 /* Serial status register */
> +#define SCIFA_SCAFTDR 0x20 /* Transmit FIFO data register */
> +
> +/* SCIF definitions */
> +#define SCIF_BASE 0xe6e60000
> +
> +#define SCIF_SCFSR 0x10 /* Serial status register */
> +#define SCIF_SCFTDR 0x0c /* Transmit FIFO data register */
> +
> +/* Common for both interfaces definitions */
> +#define SCFSR_TDFE BIT(5) /* Transmit FIFO Data Empty */
> +#define SCFSR_TEND BIT(6) /* Transmission End */
> +
> +#ifdef CONFIG_SCIF_A
> +#define UART_BASE SCIFA_BASE
> +#define UART_STATUS_REG SCIFA_SCASSR
> +#define UART_TX_FIFO_REG SCIFA_SCAFTDR
> +#else
> +#define UART_BASE SCIF_BASE
> +#define UART_STATUS_REG SCIF_SCFSR
> +#define UART_TX_FIFO_REG SCIF_SCFTDR
> +#endif
> +
> +/* All functions are inline so that they can be called from .secure section.
> */
> +
> +#ifdef DEBUG
> +static inline void debug_putc(int c)
> +{
> + void __iomem *base = (void __iomem *)UART_BASE;
> +
> + while (!(readw(base + UART_STATUS_REG) & SCFSR_TDFE))
> + ;
> +
> + writeb(c, base + UART_TX_FIFO_REG);
> + writew(readw(base + UART_STATUS_REG) & ~(SCFSR_TEND | SCFSR_TDFE),
> + base + UART_STATUS_REG);
Is this some implementation of debug uart API or is this a
reimplementation of the serial driver ?
> +}
> +
> +static inline void debug_puts(const char *s)
> +{
> + while (*s) {
> + if (*s == '\n')
> + debug_putc('\r');
> +
> + debug_putc(*s++);
> + }
> +}
> +
> +static inline void debug_puth(unsigned long val)
> +{
> + int i;
> + unsigned char c;
> +
> + for (i = 8; i--; ) {
> + c = ((val >> (i * 4)) & 0xf);
> + c += (c >= 10) ? 'a' - 10 : '0';
> + debug_putc(c);
> + }
> +}
> +#else
> +static inline void debug_putc(int c)
> +{
> +}
> +
> +static inline void debug_puts(const char *s)
> +{
> +}
> +
> +static inline void debug_puth(unsigned long val)
> +{
> +}
> +#endif
> +
> +#endif /* __DEBUG_H__ */
> diff --git a/arch/arm/mach-rmobile/psci.c b/arch/arm/mach-rmobile/psci.c
> index 95850b8..4d78b0f 100644
> --- a/arch/arm/mach-rmobile/psci.c
> +++ b/arch/arm/mach-rmobile/psci.c
> @@ -14,6 +14,7 @@
> #include <asm/secure.h>
>
> #include "pm-r8a7790.h"
> +#include "debug.h"
>
> #define R8A7790_PSCI_NR_CPUS 8
> #if R8A7790_PSCI_NR_CPUS > CONFIG_ARMV7_PSCI_NR_CPUS
> @@ -105,6 +106,16 @@ int __secure psci_cpu_on(u32 function_id, u32
> target_cpu, u32 entry_point,
> {
> int cpu;
>
> + debug_puts("[U-Boot PSCI] cpu_on: cpu=");
> + debug_puth(get_current_cpu());
> + debug_puts(", target_cpu=");
> + debug_puth(target_cpu);
> + debug_puts(", entry_point=");
> + debug_puth(entry_point);
> + debug_puts(", context_id=");
> + debug_puth(context_id);
> + debug_puts("\n");
> +
> cpu = mpidr_to_cpu_index(target_cpu);
> if (cpu == -1)
> return ARM_PSCI_RET_INVAL;
> @@ -130,6 +141,10 @@ int __secure psci_cpu_off(void)
> {
> int cpu = get_current_cpu();
>
> + debug_puts("[U-Boot PSCI] cpu_off: cpu=");
> + debug_puth(cpu);
> + debug_puts("\n");
> +
> /*
> * Place the CPU interface in a state where it can never make a CPU
> * exit WFI as result of an asserted interrupt.
> @@ -154,6 +169,10 @@ int __secure psci_cpu_off(void)
>
> void __secure psci_system_reset(u32 function_id)
> {
> + debug_puts("[U-Boot PSCI] system_reset: cpu=");
> + debug_puth(get_current_cpu());
> + debug_puts("\n");
> +
> r8a7790_system_reset();
>
> /* Drain the WB before WFI */
> @@ -166,6 +185,10 @@ void __secure psci_system_reset(u32 function_id)
>
> void __secure psci_system_off(u32 function_id)
> {
> + debug_puts("[U-Boot PSCI] system_off: cpu=");
> + debug_puth(get_current_cpu());
> + debug_puts("\n");
> +
> /* Drain the WB before WFI */
> dsb();
>
>
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
