Hi Ondřej,
On Sat, 9 Feb 2019 14:39:54 +0100, meg...@megous.com <meg...@megous.com>
wrote:
> From: Ondrej Jirman <meg...@megous.com>
>
> Signed-off-by: Ondřej Jirman <meg...@megous.com>
> ---
> board/sunxi/board.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> index 98bc3cd0c1..e918bdf36b 100644
> --- a/board/sunxi/board.c
> +++ b/board/sunxi/board.c
> @@ -774,9 +774,12 @@ static void setup_environment(const void *fdt)
> {
> char serial_string[17] = { 0 };
> unsigned int sid[4];
> +#if defined CONFIG_CMD_NET
> uint8_t mac_addr[6];
> char ethaddr[16];
> - int i, ret;
> + int i;
> +#endif
> + int ret;
>
> ret = sunxi_get_sid(sid);
> if (ret == 0 && sid[0] != 0) {
> @@ -801,6 +804,7 @@ static void setup_environment(const void *fdt)
> if ((sid[3] & 0xffffff) == 0)
> sid[3] |= 0x800000;
>
> +#if defined CONFIG_CMD_NET
> for (i = 0; i < 4; i++) {
> sprintf(ethaddr, "ethernet%d", i);
> if (!fdt_get_alias(fdt, ethaddr))
> @@ -824,6 +828,7 @@ static void setup_environment(const void *fdt)
>
> eth_env_set_enetaddr(ethaddr, mac_addr);
> }
> +#endif
>
> if (!env_get("serial#")) {
> snprintf(serial_string, sizeof(serial_string),
This patch is not needed anymore. We had a similar one also in 2018.03, but
after 2019.01 upgrade it wasn't needed. It was fixed in Apr-2018:
9925f1dbc38c:
net: Move enetaddr env access code to env config instead of net config
Tomas
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
