- Resending this as I was not subscribed to u-boot mailing list when the initial patch series was sent. Sorry for the trouble.
This patch series add networking capability to K2G ICE EVM based on netcp driver. Networking function has been tested using the latest master branch from u-boot repo. Following boot mode has been tested for networking. Net boot (tftp images over ethernet interface and boot kernel) log at https://pastebin.ubuntu.com/p/b3nyCXPhWc/ MMC boot: (load images from boot folder of rootfs and boot kernel) log at https://pastebin.ubuntu.com/p/FWycmKd9KB/ Used Linux upstream linux kernel version 4.19.9 for the tests. Please review and apply if this looks good. Thanks Murali Karicheri (7): ARM: k2g-ice: Add pinmux support for rgmii interface ARM: k2g-gp-evm: update to rgmii pinmux configuration net: netcp: add support for phy with rgmii ids ARM: k2g: add a workaround to reset the phy k2g: config enable ti phy dp83867 for k2g ARM: dts: k2g-evm: remove unused phy-mode property from phy node ARM: dts: k2g-ice: add dt node for netcp arch/arm/dts/keystone-k2g-evm.dts | 1 - arch/arm/dts/keystone-k2g-ice.dts | 35 +++++++++++++ .../mach-keystone/include/mach/hardware-k2g.h | 3 ++ arch/arm/mach-keystone/include/mach/mux-k2g.h | 5 ++ board/ti/ks2_evm/board_k2g.c | 15 ++++++ board/ti/ks2_evm/mux-k2g.h | 51 +++++++++++++------ drivers/net/ti/keystone_net.c | 22 +++++++- include/configs/k2g_evm.h | 1 + 8 files changed, 116 insertions(+), 17 deletions(-) -- 2.17.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot