> On 13.02.2019, at 11:10, David Wu <david...@rock-chips.com> wrote: > > Hi Philipp, > > 在 2019/2/12 下午9:54, Philipp Tomsich 写道: >>> On 12.02.2019, at 13:38, David Wu <david...@rock-chips.com> wrote: >>> >>> Hi Philipp, >>> >>> 在 2019/2/10 上午2:24, Philipp Tomsich 写道: >>>> That said, I have been fighting issues from this patchset when trying to >>>> read >>>> from devices on the i2c0 bus on a RK3399—which had me add a “simple” >>>> pinctrl device again, as pulling all the dependencies into the SPL is a >>>> pain. >>> >>> I think you can also add the simple ops if necessary. Full pinctrl >>> should only be used at the U-boot stage, or the SPL stage where the TPL is >>> available. >>> >>> For most boards about 3288, there is no need to enable pinctrl at SPL >>> stage, such as Tinker board. >> Could you check whether TPL_MAX_SIZE and SPL_MAX_SIZE are correct for >> the RK3288? If not, please submit a patch. > > It is correct, 32KB.
Interesting... I wonder why the build did not fail then, if SPL became too big. Anyway, let’s file this under “things to revisit, if the problem recurs”. Thanks, Philipp. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot