Hi Lukas
> > From: Lukas Auer [mailto:lukas.a...@aisec.fraunhofer.de]
> > Sent: Tuesday, February 12, 2019 6:14 AM
> > To: u-boot@lists.denx.de
> > Cc: Atish Patra; Anup Patel; Bin Meng; Andreas Schwab; Palmer Dabbelt;
> > Alexander Graf; Lukas Auer; Anup Patel; Rick Jian-Zhi Chen(陳建志); Baruch
> > Siach;
> > Stefan Roese
> > Subject: [PATCH 5/7] riscv: add support for multi-hart systems
> >
> > On RISC-V, all harts boot independently. To be able to run on a multi-hart
> > system,
> > U-Boot must be extended with the functionality to manage all harts in the
> > system. A new config option, CONFIG_MAIN_HART, is used to select the hart
> > U-Boot runs on. All other harts are halted.
> > U-Boot can delegate functions to them using smp_call_function().
> >
> > Every hart has a valid pointer to the global data structure and a 8KiB
> > stack by
> > default. The stack size is set with CONFIG_STACK_SIZE_SHIFT.
> >
> > Signed-off-by: Lukas Auer <lukas.a...@aisec.fraunhofer.de>
> > ---
> >
> > arch/riscv/Kconfig | 12 +++++
> > arch/riscv/cpu/start.S | 102 ++++++++++++++++++++++++++++++++++-
> > arch/riscv/include/asm/csr.h | 1 +
> > 3 files changed, 114 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index
> > 3a51339c4d..af8d0f8d67
> > 100644
> > --- a/arch/riscv/Kconfig
> > +++ b/arch/riscv/Kconfig
> > @@ -140,4 +140,16 @@ config SBI_IPI
> > default y if RISCV_SMODE
> > depends on SMP
> >
> > +config MAIN_HART
> > + int "Main hart in system"
> > + default 0
> > + help
> > + Some SoCs include harts of various sizes, some of which might not
> > + be suitable for running U-Boot. CONFIG_MAIN_HART is used to select
> > + the hart U-Boot runs on.
> > +
> > +config STACK_SIZE_SHIFT
> > + int
> > + default 13
> > +
> > endmenu
> > diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index
> > a30f6f7194..ce7230df37 100644
> > --- a/arch/riscv/cpu/start.S
> > +++ b/arch/riscv/cpu/start.S
> > @@ -13,6 +13,7 @@
> > #include <config.h>
> > #include <common.h>
> > #include <elf.h>
> > +#include <asm/csr.h>
> > #include <asm/encoding.h>
> > #include <generated/asm-offsets.h>
> >
If u-boot boot from flash by itself in M-mode without any FSBL or gdb,
in this case there will be no chance to assign a0.
Can we add some code as below :
_start:
+#ifdef CONFIG_RISCV_MMODE
+ csrr a0, mhartid
+#endif
/* save hart id and dtb pointer */
mv s0, a0
mv s1, a1
How do you think about it ?
Thanks
Rick
> > @@ -45,6 +46,23 @@ _start:
> > /* mask all interrupts */
> > csrw MODE_PREFIX(ie), zero
> >
> > +#ifdef CONFIG_SMP
> > + /* check if hart is within range */
> > + /* s0: hart id */
> > + li t0, CONFIG_NR_CPUS
> > + bge s0, t0, hart_out_of_bounds_loop
> > +#endif
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
