Le 16/02/2019 à 13:46, Fabio Estevam a écrit :
On Sat, Feb 16, 2019 at 10:34 AM Joris Offouga <offougajo...@gmail.com> wrote:
Le 16/02/2019 à 13:17, Fabio Estevam a écrit :
Hi Joris,
On Sat, Feb 16, 2019 at 9:06 AM Offouga Joris <offougajo...@gmail.com> wrote:
Hi Fabio
I followed Lukasz's advice and I increased the size of the U-Boot in the
dfu_alt_info and there is no more error. However, once the SPL and U-Boot are
changed and the board reboots with the jumper in Boot from emmc, the SPL can
not load the U-Boot.
What is the U-Boot size you used in the dfu_alt_info?
"u-boot raw 0x8a 0x1000"
The original setting was correct:
u-boot-dtb.img needs to be flashed at the position 69kB of the eMMC.
Originally we had:
u-boot raw 0x8a 0x400;
which means: 0x8a = 138 * 0x400 = 138 * 1024 = 138 sectors. Each
sector is 512 bytes, so 138*0.5k = 69kB
Could you also try:
u-boot raw 0x45 0x800
Does it make any difference?
Yes , download with dfu it's okay but after rebooting the SPL does not
load.
For u-boot, dm-spl, this does not work only if the SPL is converted to
DM too, because the add-on in the uscdh3 node did not change the problem
of loading the U-Boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
