On 2/21/19 11:03 PM, Simon Goldschmidt wrote: > > > Am Do., 21. Feb. 2019, 22:56 hat Marek Vasut <ma...@denx.de > <mailto:ma...@denx.de>> geschrieben: > > On 2/21/19 10:43 PM, Simon Goldschmidt wrote: > > The SPL for socfpga gen5 currently takes all peripherals out of reset > > unconditionally. To implement proper reset handling for peripherals, > > the reset node has to be provided with the SPL dts. > > > > In preparation to move the DDR driver to DM, the sdr node is required > > in SPL, too. > > > > This patch adds "u-boot,dm-pre-reloc" to U-Boot specific dtsi addon > > files so that the reset manager and SDR driver correctly probe in SPL. > > > > Signed-off-by: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com > <mailto:simon.k.r.goldschm...@gmail.com>> > > --- > > > > Changes in v2: None > > > > arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi | 8 ++++++++ > > arch/arm/dts/socfpga_cyclone5_dbm_soc1.dts | 8 ++++++++ > > arch/arm/dts/socfpga_cyclone5_de0_nano_soc-u-boot.dtsi | 8 ++++++++ > > arch/arm/dts/socfpga_cyclone5_de10_nano.dts | 8 ++++++++ > > arch/arm/dts/socfpga_cyclone5_de1_soc.dts | 8 ++++++++ > > arch/arm/dts/socfpga_cyclone5_is1.dts | 8 ++++++++ > > arch/arm/dts/socfpga_cyclone5_socdk-u-boot.dtsi | 8 ++++++++ > > arch/arm/dts/socfpga_cyclone5_sockit-u-boot.dtsi | 8 ++++++++ > > arch/arm/dts/socfpga_cyclone5_socrates-u-boot.dtsi | 8 ++++++++ > > arch/arm/dts/socfpga_cyclone5_sr1500.dts | 8 ++++++++ > > arch/arm/dts/socfpga_cyclone5_vining_fpga-u-boot.dtsi | 8 ++++++++ > > 11 files changed, 88 insertions(+) > > > > diff --git a/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi > b/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi > > index c44d1ee2fa..8aaec56285 100644 > > --- a/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi > > +++ b/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi > > @@ -17,6 +17,14 @@ > > }; > > }; > > > > +&rst { > > + u-boot,dm-pre-reloc; > > +}; > > + > > +&sdr { > > + u-boot,dm-pre-reloc; > > +}; > > What about some socfpga-common-u-boot.dtsi to avoid duplication ? > > > Right. I tested with 'socfpga-u-boot.dtsi' but the hot included for > gen10 as well.
hot included ? I don't think I understand. > But your suggested name should work fine I guess. > > Regards, > Simon > -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot