Hi Philipp,
在 2019/2/28 下午8:36, Philipp Tomsich 写道:
On 28.02.2019, at 11:50, Heiko Stübner <he...@sntech.de
<mailto:he...@sntech.de>> wrote:
Hi David,
Am Montag, 18. Februar 2019, 02:05:12 CET schrieb David Wu:
Hi Heinrich and Michael,
Another thing i see is that I missed a patch, for the 3288 gpio0, its
iomux is special, there is no high 16-bit write-enabled bit. For Tinker
board, it uses I2C0, the current driver will overwrite the I2C0 iomux,
while request the GPIO0A4. It requires a patch:
http://patchwork.ozlabs.org/patch/1040541/
I've also just stumbled onto the issue of recent uboots not booting
on rk3288. While your patch seems to have reached patchwork, somehow
the u-boot list seems to have lost it - as it's neither in public
archives nor in my inbox it seems.
Please note that I had requested changes to that patch during review.
I’ll ping David again on when he expect to have those changes implemented
and ready.
Yes, I am preparing this part of the modification for your request, and
after the
change. need to verify the more chips. Just recently more things are on
going.
Applying the patch does not make my board (phycore-rk3288 in this case)
get farther though - I'll investigate more.
But it looks like we should be having the same issue in the kernel, just
never triggered it, as the gpio0 are of more esotheric uses normally.
Anyway, I'm wondering if defining IOMUX_WRITABLE_32BIT alone
wouldn't be enough and use that for iomux, pull and drv, similar to
what we do for the pull/drv register source already.
That way we could refrain from introducing DRV_TYPE_WRITABLE_32BIT
and PULL_TYPE_WRITABLE_32BIT .
Heiko
在 2019/2/17 下午8:41, Heinrich Schuchardt 写道:
On 2/17/19 1:18 PM, Michael Nazzareno Trimarchi wrote:
Hi
[U-Boot] [PATCH 3/5] rockchip: rk3288-vyasa: increase heap space after
relocation
Can you check it if you have the same problem?
Applying all the changes causes SPL not to start.
CONFIG_SYS_MALLOC_F_LEN=0x4000
does not solve the problem.
Best regards
Heinrich
Michael
On Sun., 17 Feb. 2019, 1:11 pm Heinrich Schuchardt
<xypron.g...@gmx.de <mailto:xypron.g...@gmx.de>
<mailto:xypron.g...@gmx.de> wrote:
On 2/17/19 9:19 AM, David Wu wrote:
Hi Henrich,
在 2019/2/16 下午5:53, Heinrich Schuchardt 写道:
On 2/13/19 11:56 AM, Philipp Tomsich wrote:
<snip>
Hello David, hello Philipp,
what are your ideas to reduce the SPL size to under 0x7800 again?
Or will you move all rk3288 boards to TPL like
TARGET_VYASA_RK3288?
CONFIG_SPL_I2C_SUPPORT is necessary for Tink spl? Remove this can
make
spl boot. As the Tinker does not use the i2c to read the MAC
address
from eeprom at the SPL stage, which is at uboot.
Hello David,
the SPL image size now just fits:
Image Type: Rockchip RK32 (SD/MMC) boot image
Data Size: 30720 bytes
SPL is successful. But MMC is failing in main U-Boot:
```
U-Boot SPL 2019.04-rc1-00239-gb89074f650 (Feb 17 2019 - 12:41:39
+0100)
Returning to boot ROM...
U-Boot 2019.04-rc1-00239-gb89074f650 (Feb 17 2019 - 12:41:39
+0100)
Model: Tinker-RK3288
DRAM: 2 GiB
MMC: dwmmc@ff0c0000: 1
Loading Environment from MMC...
```
No further output here.
With some debug output enabled:
```
U-Boot SPL 2019.04-rc1-00239-gb89074f650-dirty (Feb 17 2019 -
13:05:10
+0100)
Returning to boot ROM...
mmc_bind: alias ret=0, devnum=1
env_init: Environment MMC init done (ret=-2)
U-Boot 2019.04-rc1-00239-gb89074f650-dirty (Feb 17 2019 - 13:05:10
+0100)
Model: Tinker-RK3288
DRAM: 2 GiB
mmc_bind: alias ret=0, devnum=1
MMC: dwmmc@ff0c0000: 1
Loading Environment from MMC...
```
Any suggestion how to proceed?
CC: Jaehoon.
Best regards
Heinrich
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de <mailto:U-Boot@lists.denx.de>
https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de <mailto:U-Boot@lists.denx.de>
https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
