On Mon, Mar 4, 2019 at 11:47 AM James Byrne <james.by...@origamienergy.com> wrote: > > In some of the device trees that specify skew values for KSZ90x1 PHYs > the values are stored (incorrectly) in the MAC node, whereas in others > it is in an 'ethernet-phy' subnode. Previously the code would fail to > find and program these skew values, so this commit changes it to look > for an "ethernet-phy" subnode first, and revert to looking in the MAC > node if there isn't one. > > The device trees affected (where the skew values are in a subnode) are > imx6qdl-icore-rqs.dtsi, r8a77970-eagle.dts, r8a77990-ebisu.dts, > r8a77995-draak.dts, salvator-common.dtsi, sama5d3xcm.dtsi, > sama5d3xcm_cmp.dtsi, socfpga_cyclone5_vining_fpga.dts, > socfpga_stratix10_socdk.dts and ulcb.dtsi. Before this change the skew > values in these device trees would be ignored. > > The device trees where the skew values are in the MAC node are > socfpga_arria10_socdk.dtsi, socfpga_arria5_socdk.dts, > socfpga_cyclone5_de0_nano_soc.dts, socfpga_cyclone5_de10_nano.dts, > socfpga_cyclone5_de1_soc.dts, socfpga_cyclone5_is1.dts, > socfpga_cyclone5_socdk.dts, socfpga_cyclone5_sockit.dts. These should be > unaffected by this change. > > The changes were tested on a sama5d3xcm. > > Signed-off-by: James Byrne <james.by...@origamienergy.com>
Acked-by: Joe Hershberger <joe.hershber...@ni.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot