After building ATF it is needed to copy the generated bl31.bin file to the U-Boot source tree.
Make this step explicit in the instructions. Signed-off-by: Fabio Estevam <feste...@gmail.com> --- board/freescale/imx8mq_evk/README | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README index 2529f7da3d..bd5ee12722 100644 --- a/board/freescale/imx8mq_evk/README +++ b/board/freescale/imx8mq_evk/README @@ -9,13 +9,14 @@ Quick Start Get and Build the ARM Trusted firmware ==================== +Note: srctree is U-Boot source directory Get ATF from: https://source.codeaurora.org/external/imx/imx-atf branch: imx_4.14.62_1.0.0_beta $ make PLAT=imx8mq bl31 +$ cp build/imx8mq/release/bl31.bin $(srctree) Get the ddr and hdmi firmware ==================== -Note: srctree is U-Boot source directory $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin $ chmod +x firmware-imx-7.9.bin $ ./firmware-imx-7.9.bin -- 2.17.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
