On Wed, 2019-03-13 at 10:33 -0500, Dinh Nguyen wrote: > > On 3/13/19 9:32 AM, Dinh Nguyen wrote: > > > > > > > > On 3/13/19 12:59 AM, Ley Foon Tan wrote: > > > > > > On Wed, 2019-03-13 at 04:30 +0100, Marek Vasut wrote: > > > > > > > > On 3/13/19 4:03 AM, Ley Foon Tan wrote: > > > > > > > > > > > > > > > Syscon register is required in dts to select correct > > > > > PHY interface. > > > > > > > > > > Fix error below: > > > > > > > > > > Net: Failed to get syscon: -2 > > > > > > > > > > Signed-off-by: Ley Foon Tan <ley.foon....@intel.com> > > > > Is this fixed in mainline Linux too ? > > > Didn't see this in mainline Linux. > > > > > > Dinh, do you aware of this? I see sysmgr-syscon error in EMAC in > > > v4.20 > > > kernel. > > > > > > [ 1.427994] socfpga-dwmac ff800000.ethernet: Could not read > > > reg_offset from sysmgr-syscon! > > > [ 1.436241] socfpga-dwmac ff800000.ethernet: Unable to parse > > > OF data > > > [ 1.442646] socfpga-dwmac: probe of ff800000.ethernet failed > > > with > > > error -22 > It looks like you're running downstream Linux. The failed to probe > message is only in the downstream Linux, not upstream Linux. > > Dinh > Yes, I am using downstream socfpga-4.20 branch. Upstream Linux can ping IP address successfully?
Regards Ley Foon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot