Hi Simon, > From: Simon Glass <s...@chromium.org> > Sent: mardi 19 mars 2019 02:25 > > Hi Patrick, > > On Mon, 11 Feb 2019 at 19:50, Patrick Delaunay <patrick.delau...@st.com> > wrote: > > > > We can remove the pre reloc property in SPL and TPL device-tree: > > - u-boot,dm-pre-reloc > > - u-boot,dm-spl > > - u-boot,dm-tpl > > As only the needed node are kept by fdtgrep (1st pass). > > > > The associated function (XXX_pre_reloc) are simple for SPL/TPL: > > return always true. > > > > > > Signed-off-by: Patrick Delaunay <patrick.delau...@st.com> > > --- > > > > remove pre reloc properties in SPL and TPL device tree > > > > Patch created after some remarks on previous > > http://patchwork.ozlabs.org/patch/1035797/ > > > > I check the current code and I found a way to reduce the SPL device > > tree > > size: remove the un-necessary pre reloc parameters in SPL/TPL DT (as > > the node check is already managed by fdtgrep) > > > > But I need to change the DM code to avoid the check on presence of > > this parameters... > > > > On my board stm32mp1-ev1, the SPL device tree is reduced by 790 bytes > > (11149 to 10419) and the SPL binary u-boot-spl.stm32 by 798 bytes > > (64745 to 63947); the boot is not broken and I have the expected delta > > between generated device tree. > > > > But I don't sure that I see all the side impact of the code change in > > SPL/TPL. > > > > PS: I already see a side effect on this patch, because all node are now > > bounded in SPL/TPL, it is no more needed to TAG all the device tree > > path but only the last needed children. > > But in this case phandle for parent node are not keep. > > Yes that makes sense. I suppose we could enhance fdtgrep to handle this.
Probably but I checked the code but I don't found a way to handle with lidfdt. I think is completely handle when a region is dumped (for father mode with FDT_REG_SUPERNODES) in dump_fdt_regions is doen without any property (including phandle), only FDT_BEGIN_NODE and FDT_END_NODE are used => p.want = WANT_NODES_ONLY vs WANT_NODES_AND_PROPS > > > > > > drivers/core/ofnode.c | 16 ++++++++-------- > > drivers/core/util.c | 31 +++++++++++++++---------------- > > scripts/Makefile.lib | 1 + > > 3 files changed, 24 insertions(+), 24 deletions(-) > > > > diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c index > > 0e584c1..5a109dd 100644 > > --- a/drivers/core/ofnode.c > > +++ b/drivers/core/ofnode.c > > @@ -700,18 +700,18 @@ int ofnode_read_simple_size_cells(ofnode node) > > > > bool ofnode_pre_reloc(ofnode node) > > { > > +#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_TPL_BUILD) > > + /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass > > + * had property dm-pre-reloc or u-boot,dm-spl/tpl. > > + * They are removed in final dtb (fdtgrep 2nd pass) > > + */ > > + return true; > > +#else > > if (ofnode_read_bool(node, "u-boot,dm-pre-reloc")) > > return true; > > if (ofnode_read_bool(node, "u-boot,dm-pre-proper")) > > return true; > > > > -#ifdef CONFIG_TPL_BUILD > > - if (ofnode_read_bool(node, "u-boot,dm-tpl")) > > - return true; > > -#elif defined(CONFIG_SPL_BUILD) > > - if (ofnode_read_bool(node, "u-boot,dm-spl")) > > - return true; > > -#else > > /* > > * In regular builds individual spl and tpl handling both > > * count as handled pre-relocation for later second init. > > @@ -719,9 +719,9 @@ bool ofnode_pre_reloc(ofnode node) > > if (ofnode_read_bool(node, "u-boot,dm-spl") || > > ofnode_read_bool(node, "u-boot,dm-tpl")) > > return true; > > -#endif > > > > return false; > > +#endif > > } > > > > int ofnode_read_resource(ofnode node, uint index, struct resource > > *res) diff --git a/drivers/core/util.c b/drivers/core/util.c index > > 27a6848..451f772 100644 > > --- a/drivers/core/util.c > > +++ b/drivers/core/util.c > > @@ -33,16 +33,15 @@ int list_count_items(struct list_head *head) > > > > bool dm_fdt_pre_reloc(const void *blob, int offset) > > This function should really be removed. We should be able to use the ofnode > version always. Ok, I migrate the 2 calls of the function = drivers/clk/at91/pmc.c:64: !dm_fdt_pre_reloc(fdt, offset)) drivers/clk/altera/clk-arria10.c:257: if (pre_reloc_only && !dm_fdt_pre_reloc(fdt, offset)) and remove the function dm_fdt_pre_reloc in a separet patchset (today I think) => [PATCH 0/3] remove dm_fdt_pre_reloc, replaced by dm_ofnode_pre_reloc http://patchwork.ozlabs.org/project/uboot/list/?series=98272 PS: it is already done for dm_ofnode_pre_reloc() in http://patchwork.ozlabs.org/patch/1035799 > > { > > +#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_TPL_BUILD) > > + /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass > > + * had property dm-pre-reloc or u-boot,dm-spl/tpl. > > + * They are removed in final dtb (fdtgrep 2nd pass) > > + */ > > + return true; > > +#else > > if (fdt_getprop(blob, offset, "u-boot,dm-pre-reloc", NULL)) > > return true; > > - > > -#ifdef CONFIG_TPL_BUILD > > - if (fdt_getprop(blob, offset, "u-boot,dm-tpl", NULL)) > > - return true; > > -#elif defined(CONFIG_SPL_BUILD) > > - if (fdt_getprop(blob, offset, "u-boot,dm-spl", NULL)) > > - return true; > > -#else > > /* > > * In regular builds individual spl and tpl handling both > > * count as handled pre-relocation for later second init. > > @@ -57,16 +56,16 @@ bool dm_fdt_pre_reloc(const void *blob, int > > offset) > > > > bool dm_ofnode_pre_reloc(ofnode node) { > > +#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_TPL_BUILD) > > + /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass > > + * had property dm-pre-reloc or u-boot,dm-spl/tpl. > > + * They are removed in final dtb (fdtgrep 2nd pass) > > + */ > > + return true; > > +#else > > if (ofnode_read_bool(node, "u-boot,dm-pre-reloc")) > > return true; > > > > -#ifdef CONFIG_TPL_BUILD > > - if (ofnode_read_bool(node, "u-boot,dm-tpl")) > > - return true; > > -#elif defined(CONFIG_SPL_BUILD) > > - if (ofnode_read_bool(node, "u-boot,dm-spl")) > > - return true; > > -#else > > /* > > * In regular builds individual spl and tpl handling both > > * count as handled pre-relocation for later second init. > > @@ -74,7 +73,7 @@ bool dm_ofnode_pre_reloc(ofnode node) > > if (ofnode_read_bool(node, "u-boot,dm-spl") || > > ofnode_read_bool(node, "u-boot,dm-tpl")) > > return true; > > -#endif > > > > return false; > > +#endif > > } > > diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index > > a5b57fc..3f4c86e 100644 > > --- a/scripts/Makefile.lib > > +++ b/scripts/Makefile.lib > > @@ -524,4 +524,5 @@ quiet_cmd_fdtgrep = FDTGREP $@ > > cmd_fdtgrep = $(objtree)/tools/fdtgrep $(fdtgrep_props) -RT $< \ > > -n /chosen -n /config -O dtb | \ > > $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \ > > + -P u-boot,dm-pre-reloc -P u-boot,dm-spl -P > > + u-boot,dm-tpl \ > > $(addprefix -P ,$(subst > > $\",,$(CONFIG_OF_SPL_REMOVE_PROPS))) > > -- > > 2.7.4 > > > > Is there a documentation update you can do to describe how things now work? Yes I can try it .... which documentation files is the correct place for you ? In "Pre-Relocation Support" chapter of doc/ driver-model/README (as 'u-boot,dm-spl' and 'u-boot,dm-tpl' are only described here) Or in doc/README.SPL and doc/READMETPL ? > Regards, > Simon Regards Patrick _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot