The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series PowerPC processors (which were
evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and
i.MX series processors were using this driver for their eSDHCs too.
For the two series processors, the eSDHCs are becoming more and
more different. We should have split it into two drivers, like them
(sdhci-of-esdhc.c/sdhci-esdhc-imx.c) in linux kernel.
This patch is just to create a fsl_esdhc_imx driver which is a copy
of fsl_esdhc driver for i.MX processors. We will convert i.MX processors
to use fsl_esdhc_imx, and clean up the two drivers separately in the
future patches.
Signed-off-by: Yangbo Lu <yangbo...@nxp.com>
---
Changes for v2:
- None.
---
drivers/mmc/Kconfig | 6 ++++++
drivers/mmc/Makefile | 1 +
drivers/mmc/{fsl_esdhc.c => fsl_esdhc_imx.c} | 5 +++--
include/{fsl_esdhc.h => fsl_esdhc_imx.h} | 11 ++++++-----
4 files changed, 16 insertions(+), 7 deletions(-)
copy drivers/mmc/{fsl_esdhc.c => fsl_esdhc_imx.c} (99%)
copy include/{fsl_esdhc.h => fsl_esdhc_imx.h} (97%)
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 04a4e7716f..09bc02fe9c 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -641,6 +641,12 @@ config FSL_ESDHC
This selects support for the eSDHC (enhanced secure digital host
controller) found on numerous Freescale/NXP SoCs.
+config FSL_ESDHC_IMX
+ bool "Freescale/NXP i.MX eSDHC controller support"
+ help
+ This selects support for the i.MX eSDHC (enhanced secure digital host
+ controller) found on numerous Freescale/NXP SoCs.
+
endmenu
config SYS_FSL_ERRATUM_ESDHC111
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 7892c468f0..1287ad4cc1 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_MMC_DW_K3) +=
hi6220_dw_mmc.o
obj-$(CONFIG_MMC_DW_ROCKCHIP) += rockchip_dw_mmc.o
obj-$(CONFIG_MMC_DW_SOCFPGA) += socfpga_dw_mmc.o
obj-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
+obj-$(CONFIG_FSL_ESDHC_IMX) += fsl_esdhc_imx.o
obj-$(CONFIG_FTSDC010) += ftsdc010_mci.o
obj-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
obj-$(CONFIG_MMC_MESON_GX) += meson_gx_mmc.o
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc_imx.c
similarity index 99%
copy from drivers/mmc/fsl_esdhc.c
copy to drivers/mmc/fsl_esdhc_imx.c
index 9e34557d16..a031c628ea 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -2,6 +2,7 @@
/*
* Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
* Andy Fleming
+ * Copyright 2019 NXP
*
* Based vaguely on the pxa mmc code:
* (C) Copyright 2003
@@ -18,7 +19,7 @@
#include <part.h>
#include <power/regulator.h>
#include <malloc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
#include <fdt_support.h>
#include <asm/io.h>
#include <dm.h>
@@ -110,7 +111,7 @@ struct esdhc_soc_data {
* @non_removable: 0: removable; 1: non-removable
* @wp_enable: 1: enable checking wp; 0: no check
* @vs18_enable: 1: use 1.8V voltage; 0: use 3.3V
- * @flags: ESDHC_FLAG_xx in include/fsl_esdhc.h
+ * @flags: ESDHC_FLAG_xx in include/fsl_esdhc_imx.h
* @caps: controller capabilities
* @tuning_step: tuning step setting in tuning_ctrl register
* @start_tuning_tap: the start point for tuning in tuning_ctrl register
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc_imx.h
similarity index 97%
copy from include/fsl_esdhc.h
copy to include/fsl_esdhc_imx.h
index 8dbd5249a7..e05b24e7e8 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc_imx.h
@@ -4,10 +4,11 @@
*-------------------------------------------------------------------
*
* Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc
+ * Copyright 2019 NXP
*/
-#ifndef __FSL_ESDHC_H__
-#define __FSL_ESDHC_H__
+#ifndef __FSL_ESDHC_IMX_H__
+#define __FSL_ESDHC_IMX_H__
#include <linux/bitops.h>
#include <linux/errno.h>
@@ -258,15 +259,15 @@ struct fsl_esdhc_cfg {
#error "Endianess is not defined: please fix to continue"
#endif
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
int fsl_esdhc_mmc_init(bd_t *bis);
int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg);
void fdt_fixup_esdhc(void *blob, bd_t *bd);
#else
static inline int fsl_esdhc_mmc_init(bd_t *bis) { return -ENOSYS; }
static inline void fdt_fixup_esdhc(void *blob, bd_t *bd) {}
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
void __noreturn mmc_boot(void);
void mmc_spl_load_image(uint32_t offs, unsigned int size, void *vdst);
-#endif /* __FSL_ESDHC_H__ */
+#endif /* __FSL_ESDHC_IMX_H__ */
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
