On Thu, Mar 21, 2019 at 11:39 PM Troy Benjegerdes <ho...@hozed.org> wrote: > > On Sun, Mar 17, 2019 at 07:28:31PM +0100, Lukas Auer wrote: > > This patch series adds SMP support for RISC-V to U-Boot. It allows > > U-Boot to run on multi-hart systems (hart is the RISC-V terminology for > > hardware thread). Images passed to bootm will be started on all harts. > > The bootm command is currently the only one that will boot images on all > > harts, bootefi is not yet supported. > > > > The patches have been successfully tested on both QEMU (machine and > > supervisor mode) and the HiFive Unleashed board (supervisor mode), using > > BBL and OpenSBI. > > Can you describe the test configuration and boot flow a little more, or post > an > SDcard image that boots with the switches as shown in the readme at [1] > > I don't see any board-specific memory initialization code anywhere, so I > assume > you are still using the original SiFive FSBL, and not the u-boot version that > includes the memory init code [2] >
Correct. Mainline U-Boot on the FU540 board runs on S-mode currently. You can refer to documentation doc/README.sifive-fu540 > [1] https://github.com/sifive/freedom-u-sdk > [2] https://github.com/sifive/HiFive_U-Boot > Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot